Data Sheet

Altronix HubWayEXP UTP Power Injector supplies
power combined with pass through video and data
for up to 16 cameras from Altronix HubWay Active
UTP Transceiver Hubs. Unit allows for video trans-
mission of up to 16 cameras over four CAT-5 or
higher structured cables from HubWay Active Transceiver Hubs.
The HubWayEXP units are designed for installation at the IDF (Intermediate Distribution Frame) or MDF (Main
Distribution Frame).
Input:
• 115VAC 60Hz, 2.5 amp or 230VAC 50Hz, 1.5 amp.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 16 amp maximum current.
• Individually selectable 24VAC or 28VAC
power outputs
with OFF position.
• Individual electronically isolated PTC outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• Individual power LED indicators.
Features:
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire receptacle.
• Unit can be rack, wall or shelf mounted.
• 1U rack mount chassis for use in standard
EIA 19” rack.
Shipping Weight (approximate):
- HubWayEXP: 9 lbs.
HubWay
®
EXP - UTP Power Injector
Rev. DSHubWayEXP - E13J
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals