Instructions

- 4 - HubWay Passive Unit
1 2 3 4 CH 1-4 CH 5-8
28VAC OFF
24VAC
+ DATA -
1-8
+ DATA -
9-16
5 6 7 8 9 10 11 12 CH 9-12
28VAC
OFF
24VAC
13 14 15 16 CH 13-16
AC POWER
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
OFF
RESET
1a - Channels 1-8 (HubWay8CD)
or Channels 1-16 (HubWay16CD):
CAT-5 or higher structured cable to Video/Balun Combiners at cameras 1-8 or 1-16. When using an optional HubSat4D any of the outputs can be utilized for the data transmission to PTZ’s.
1f - BNC Connector: Video outputs to head end equipment (DVR).
1d - Output voltage switches: Selects 24VAC/28VAC/OFF for each output.
1b - Channels 1-4, Channels 5-8, Channels 9-12 & Channels 13-16: CAT-5 or higher structured cable from optional HubSat4D enables video transmission from up to four (4) cameras.
1g - IEC 320 Connector: 115VAC 60Hz (grounded line cord included).
Fig. 1 1e - Data: Removable
terminal blocks for RS422/ RS485 input from head end equipment (DVR) for PTZ control.
+ --
Data input from
Head End
Equipment (DVR).
Top View
1c - LED(s) 1-16: Power indicators.
Front
Rear