Instruction Manual

HubWayH16 Passive UTP Transceiver Hubs transmit UTP video and RS422/
RS485 data up to 750 feet along with pass through externally injected cam-
era power over a single CAT-5 or higher structured cable. This UTP solution
accommodates any combination of up to 16 AC or DC cameras. Additionally,
each channel has an optional pass-thru power feature that bundles 3-pair to
extend power range. Use with any Altronix power supply.
HubWay H16 - Passive UTP Transceiver Hub
Rev. DSHubWayH16_10262012
Overview
Specifications
Agency Approvals
European Conformity
Video:
• Sixteen(16)channelsofvideoovertwistedpair
 uptoadistanceof750ft.(228.6m)perchannel.
• Sixteen(16)75ohmvideooutputs.
Data:
• RS422/RS485 data inputs.
Power Input:
• Sixteen(16)individualACorDCpowerinputs.
 (UseanyAltronixpowersupply).
Operating Modes:
• Eachchannelisselectableforthefollowingmodes:
- Video/Data/Power: for AC or DC fixed cameras
or PTZs.
- Pass-Thru Power: for AC or DC fixed cameras
  only(useHubWayAvPvideobalun/combiner).
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
Accessories:
• VideoBalun/Combiners:
- HubWayAv2 Slim-line - compatible with all
HubWay UTP Hubs for AC or DC fixed cameras
or PTZs.
- HubWayAvP Slim-line - compatible with
HubWayH16 for optional pass-thru power
feature for fixed AC or DC cameras only.
- HubWayDv - compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs.
- HubWayDvi - built-in isolation. Compatible with
all HubWay UTP Hubs for DC fixed cameras
or PTZs.
Mechanical:
• Modular1UstandardEIA19”rackmountchassis
• EnclosureDimensions(HxWxDapprox.):
 1.625”(41.275mm)x19.125”(486mm)
x 2.498”(63.45mm)
• Productweight(approx.):2.8lbs.(3.27kg).
• Shippingweight(approx.):3.8lbs.(3.86kg).
HubWayH16
Video from Camera
Data to Camera
Power to Camera
Cat5
back to
HubWay
or
HubSat
Cat5
back to
HubWayH16
Video from Camera
Power to Camera
Power to Camera
HubWayAvP - Slim-line Video Balun/Combiner
compatible with HubWayH16 for optional pass
through power feature for fixed AC or DC
cameras only.
Refer to the HubWay Video Balun/Combiner
Installation Guide Rev. 123008
12VDC
-- +RJ45
DATA
+ --
VIDEO
Commercial
CCTV Accessory
3C03
HubWayDv VIDEO BALUN/COMBINER
Wire
Connectors
Red
Power LED
+ 12VDC Power
--- to Camera
--- Data
+ to Camera
To BNC
Connector
of Camera
Structured
Cable from
HubWayH16
RJ45 Jack
HubWayDv - Video Balun/Combiner
compatible with all HubWay UTP Hubs for DC
fixed cameras or PTZs.
HubWayDvi - Video Balun/Combiner
built-in isolation. Compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs. With
or without internal isolation.
HubWayAv2 - Slim-line Video Balun/Combiner
compatible with all HubWay UTP Hubs
for AC or DC fixed cameras or PTZs.