Installation Instructions

- 6 - HubSat4Di
White
Lead
Black
Lead
non power-limited
non power-limited
Green Lead
(Ground)
115VAC
Input
50/60 Hz.
XFMR
PVD1
VIDEO1 VIDEO2 VIDEO3
PVD2 PVD3 PVD4
+ DATA -
DATA 1-4VIDEO 1-4
28VAC
24VAC
28VAC
24VAC
28VAC
24VAC
28VAC
24VAC
OFF OFF OFF OFF
AUX1 AUX2 AUX3 AUX4
To
Camera
Passive/Active UTP Tranceiver
Hub with Integral Camera Power
(ON)
Illuminated master power
disconnectcircuitbreaker:
• OFFpositionCircuitbreakertripped–
Switch not illuminated.
• RESET(ON)position–
Switch illuminated.
Fig. 4a
Fig. 4
1 - White/Orange [VIDEO +]
2 - Orange [VIDEO -- ]
3 - White/Green [DATA +]
4 - Blue [AC 1]
5 - White/Blue [AC 2]
6 - Green [DATA -- ]
7 - White/Brown [AC 2]
8 - Brown [AC 1]
Fig. 3 - CAT-5 Structured Cable Wiring Color Codes and PIN Configurations
HubWayAv/HubWayAv2 passes AC voltage from pins
4,5,7,8toterminalsmarked[ACPower](Fig. 3, pg. 5).
HubWayDv converts AC voltage to DC voltage from pins
4, 5, 7, 8 to terminals marked [--12VDC+](Fig. 3, pg. 5).
Fig. 2e
HubWayAv2
Video from Camera
Data to Camera
Power to Camera
Cat5
back to
HubWay
or
HubSat