Installation Guide

- 6 - eFlow4NA8D, eFlow6NA8D, eFlow102N8D, eFlow104N8D series
Power Supply Board Stand-by Battery Specifications:
Battery
eFlow4NA8D eFlow6NA8D eFlow102NA8D eFlow104NA8D
7AH
30 Mins./4 amp* 10 Mins./6 amp 5 Mins./10 amp 5 Mins./10 amp
12AH
35 Mins./4 amp* 30 Mins./6 amp* 30 Mins./10 amp* 30 Mins./10 amp*
40AH
Over 4 Hours/4 amp* Over 4 Hours/6 amp* Over 2 Hours/10 amp* Over 2 Hours/10 amp*
65AH
Over 4 Hours/4 amp* Over 4 Hours/6 amp* Over 4 Hours/10 amp* Over 4 Hours/10 amp*
*Only these configurations can be utilized in ULC-S319 installations.
Power Supply Board Output Voltage Settings:
Fig. 1
Fig. 1a
--- DC +
OFF --- 24V ON --- 12V
ON
Switch Detail
ON
1
ON
1
Switch On - 12V
Switch Off - 24V