Spec Sheet

Input
Voltage 220VAC (working range 198VAC - 256VAC),
50/60Hz, 2.1A max.
Fusing 5A/250V
Outputs
Voltage 12VDC
Current 10A continuous max.
Protection Fused 2.5A / PTC 2A
Auxiliary 1A (unswitched)
Other Overvoltage protection
Filtered and regulated
Back-up Battery (not included)
Capacity 7AH / 12VDC (1 within enclosure)
12AH / 12VDC (requires larger “X” enclosure)
40AH, 65AH (requires separate enclosure)
Type Sealed lead acid or gel type
Fuse Rating 15A/32V
Failover Upon AC loss, instantaneous
Fire Alarm Disconnect
Supervised Latching or non-latching
EOL 10K Resistor
Supervision
AC Failure Form “C” contacts
Battery Form “C” contacts
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
71-73% for 12V units and 70-75% for 24V units
(depending on the power supply). Prevents deep battery discharge
Indicators (LED)
Input 220VAC is present
DC Output Powered
Agency Listings
CE European Conformity
Physical and Environmental
Dimensions (H x W x D)
eFlow102NV, eFlow102N8(D)V, eFlow102N16(D)V:
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
eFlow102NXV, eFlow102NX8(D)V, eFlow102NX16(D)V:
15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
Product Weight / Shipping (approx.)
Model Product Weight Shipping Weight
eFlow102NV 6.55 lb. (2.97 kg) 7.45 lb. (3.38 kg)
eFlow102NXV 8.4 lb. (3.81 kg) 9.5 lb. (4.31 kg)
eFlow102N8(D)V 6.7 lb. (3.04 kg) 7.6 lb. (3.45 kg)
eFlow102NX8(D)V 8.6 lb. (3.9 kg) 9.7 lb. (4.4 kg)
eFlow102N16(D)V 6.85 lb. (3.11 kg) 7.75 lb. (3.52 kg)
eFlow102NX16(D)V 8.75 lb. (3.97 kg) 9.85 lb. (4.47 kg)
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF)
Storage -20ºC to 70ºC (-4ºF to 158ºF)
Relative Humidity 85% +/-5%
BTU/Hr (approx.): 61 BTU/Hr.
Specifications
eFlow102NV Series
Power Supply/Chargers
Lifetime Warranty
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com
™
Accessories (order separately)
LINQ2 - Network Supervision
Altronix LINQ2 Network Communication Module provides remote supervision, control and monitoring over LAN/WAN
- Remotely reports accurate power diagnostics
- Controls power and resets devices
- Reports system diagnostics via Email
LINQ2