Installation Instructions Owner manual

- 4 - eBridge4CR
Ethernet Switch
Coax
Structured Cable
* External power
required for cameras
Up to 1500 ft.
Up to
328 ft.
Ethernet Switch
IP Camera*
IP Camera*
IP Camera*
IP Camera*
NVR Network
Video Server
(Head End
Equipment)
Matrix Switch
Monitor
Ethernet Switch
Coax
Structured Cable
Composite Video Cable
* External power
required for
cameras
Up to 1500 ft.
Up to 1500 ft.
Up to 1500 ft.
Up to 1500 ft.
NVR Network
Video Server
(Head End
Equipment)
IP Camera*
IP Camera*
IP Camera*
IP Camera*
Solutions and Installation Notes:
Currently Matrix Switchers, DVRs and NVRs do not readily accommodate multi-picture (Matrix) monitor display
capability(typically4X4–16channeldisplay)forsomeofthehigherresolutioncameras.InadditionHDcamerasuse
awidescreenformat(16:9aspectratio).Thismaynotfitaswellintothematrixdisplayasthestandardscreenformat
(4:3aspectratio).Inadditionhighresolutionmultichannelrecordingcanintroduceunacceptablelatencyinthereal-time
monitor display.
Toachievehighresolutionrecordingalongwithreal-timemulti-channelviewing:RecordthehighresolutionIPvideovia
the NVR and the simultaneous composite video via the Matrix switcher to achieve proper display format (Fig. 4, pg. 4).
Multiple IP cameras shown with composite video option:
Fig. 4
Multiple IP cameras over a single Coax:
Fig. 5
*Note: Multiple cameras require higher bandwidth and headend equipment processing speed. It is advised to test this
configuration. eBridge is rated to pass 25mbps of data at distances up to 1500 ft. With proper headend equipment,
multiple Megapixel cameras can be used.
Altronix is not responsible for any typographical errors.
14058thStreet,Brooklyn,NewYork11220USA,718-567-8181,fax:718-567-9056
website:www.altronix.com,e-mail:[e-mail],LifetimeWarranty,MadeinU.S.A.
IIeBridge4CR F24M
MEMBER