Data Sheet

Input:
• 24VDC to 56VDC Class 2 power supply
(polarity observed).
Power Consumption (under maximum load):
• eBridge1PCRX: 24VDC/1,500mA, 56VDC/900mA.
eBridge1PCTX (30W): Powered by eBridge1PCRX.
eBridge1PCT (15W): Powered by eBridge1PCRX.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) delivered to camera
by eBridge1PCTX. Power provided by eBridge1PCRX
to eBridge1PCTX by PoE protocol.
• Throughput is rated to pass 25mbps of data at
distances up to 457m with proper headend
equipment which supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 457m for power delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge1PCRX:
Blue - Coax link connection.
Green - PoE ON. Green - Power ON.
Yellow and Green - (RJ45) IP Link status,
10/100Base-T/active.
• eBridge1PCTX:
Blue - Coax link connection.
Green - PoE from eBridge1PCRX.
Environmental:
• Operating Temperature:
eBridge1PCRX:
15W: -- 20ºC to 45ºC (-- 4ºF to 113ºF).
30W for 24VDC: -- 20ºC to 37ºC (-- 4ºF to 98.6ºF).
30W for 48VDC: -- 20ºC to 45ºC (-- 4ºF to 113ºF).
eBridge1PCTX: -- 20ºC to 49ºC (-- 4ºF to 120.2ºF).
Environmental (cont’d):
• Storage Temperature:
--- 20º to 70ºC (-- 4º to 158ºF).
• Relative humidity: 85%, +/-- 5%, non-condensing.
• Operating Altitude: -- 304.8 to 2000m
(-- 1000 to 6,561.679 ft.).
Electrical:
• BTU/Hr.:
- 24VDC: 18.43 BTU/Hr.
- 56VDC: 25.8 BTU/Hr.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
in Retail, Hospitality, Arenas, Casinos, Airports,
Schools, Hospitals, Transportation, etc.
Accessories:
Input (Power):
• NetWay1D: 56VDC Power Supply provides Class 2
power-limited output rated @ 56VDC/60W.
Mechanical:
• Lightweight molded compact insulated housing.
• Dimensions (W x L x H approx.):
eBridge1PCRX:
3.5” x 4.375” x 1” (88.89mm x 111.125mm x 25.4mm)
eBridge1PCTX:
2.5” x 4.375” x 1” (63.5mm x 111.125mm x 25.4mm)
• Product Weight: 0.4 lbs. (0.181 kg).
• Shipping Weight: 1 lb. (0.45 kg).
eBridge1PCRTX - IP/PoE over Coax Kit
Rev. DSeBridge1PCRTX_10222014
Specifications
eBridge1PCRTX is a single port EoC Receiver and Transceiver kit that trans-
mits data and power over coax cable. eBridge1PCRX generates PoE/PoE+
up the coax to an eBridge1PCTX transceiver. The transceiver in turn delivers
that PoE compliant power to an edge device/camera. This plug and play unit
facilitates system upgrades from analog to IP utilizing existing legacy Coax and
eliminates the costs and labor associated with installing new network cabling.
Data transmission and power over the Coax is possible up to 457m in compari-
son to 100m Ethernet distance (CAT5e). A maximum range from head end to
the edge device/camera is 657m taking into consideration that up to 100m of
structured cable may be deployed from the receiver to the network switch and
the transceiver to the edge device/camera.
Overview
eBridge1PCRX
eBridge1PCTX