Instruction Manual

The eBridge1PCR is CAT5 to Coax cable Ethernet Receiver that deliver data and
power over the coax cable in a PoE compliant format. It sends power over the coax to
the eBridge1PCT transmitter under PoE protocol. The eBridge1PCR will not deliver
power to non-compliant devices, thus avoiding damage to improperly connected
non-PoE cameras. This plug and play unit facilitates system upgrades from analog
to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and
labor associated with installing new network cabling. In addition, data transmission
and power over the Coax is possible up to 1500 ft. in comparison to 100m (328 ft.)
Ethernet maximum distance. A maximum range from head end to the PoE camera/
device is 610m (2000 ft.), taking into consideration that up to 100m (328 ft.) of struc-
tured cable may be deployed at each end.
eBridge1PCR - IP over Coax Receiver
Rev. DSeBridge1PCR_08012013
Overview
eBridge1PCR
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
C-Tick Approved - Z1409
Specifications
* sloc is a registered trademark of Intersil Corporation.
Agency Listings:
• UL/CULListedforInformation
Technology Equipment (UL 60950-1).
• CEapproved.
• C-Tickcompliant.
Compliant:
• Incorporates*sloc
TM
(Security Link over Coax) technology.
Input:
• 24VDCClass2powersupply(polarity not observed)
 or24VACClass2plug-intransformer.
Power Consumption (under maximum load):
• 24VDC/1,000mA,24VAC/900mA.
Ethernet:
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCAT5orbetterstructuredcable.
• Distance:upto100m (328 ft.).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
 PoEcomplianttoIEEE802.3af(15W)Deliveredto
camera by eBridge1PCT. Power provided by
eBridge1PCR to eBridge1PCT by PoE protocol.
• Throughput is rated to pass 25mbps of data at
 distancesupto2,000ft.Withproperheadend
equipment, this supports Megapixel, HD720, HD1080.
Coax:
• Distance:upto1,500ft.for power delivery of coax.
• Connectivity:BNC,RG-59/Uorsimilar.
LED Indicators:
Blue LED - Coax link connection (SLOC).
 Green-PoEON.
 Green-PowerON.
 YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
Environmental:
• OperatingTemperature:
--- 4ºF to 113ºF (--- 20ºC to +45ºC).
• StorageTemperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity:20to85%,non-condensing.
Electrical:
• BTU/Hr.:
 - 24VDC:12.28BTU/Hr.
 - 24VAC:11.1BTU/Hr.
Functions:
• Autodetectionandprotectionoflegacy
non-PoE cameras/devices.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
(SD) cameras.
• ExtendNetworklinkdistanceinanindustrial
environment over 610m (2000 ft.).
• UpgradedeployedCCTVCoaxtoadigitalnetwork
in Retail, Casinos, Airports, Schools, Hospitals, etc.
Mechanical:
• Dimensions(WxLxHapprox.):
3.5” x 4.375” x 1” (88.89mm x 111.125mm x 25.4mm)
• ProductWeight:0.275Lbs(0.125kg).
• ShippingWeight:1Lbs(0.45kg).