Owner's manual

The eBridge1CT - IP over Coax transceiver is designed for use with eBridge1CR,
eBridge4CR and eBridge16CR receivers to enable fast 10/100Base-T Ethernet digital
communication over coax cable. This plug and play unit facilitates system upgrades
from analog to IP cameras/devices utilizing existing legacy Coax and eliminating
the costs and labor associated with installing new network cabling. In addition data
transmission is extended to 2,000’ (over five times the 100m/328’ Ethernet maximum
length), eliminating the need for repeaters. eBridge units will transmit Composite
Video Signal with Ethernet data simultaneously.
Input:
• 12VDCto24VDCClass2powersupply(polaritynot
observed) or 16VAC to 24VAC Class 2 plug-in
transformer.
Power Consumption:
• 12VDC/275mA,24VDC/110mA,
 16VAC/375mA,24VAC/200mA.
Compliant:
• Incorporates*sloc
TM
(Security Link over Coax)
technology.
Ethernet:
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCat-5orhigherstructuredcable.
• Distance:upto328ft.(100m).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
• Throughputisratedtopass25mbpsofdataat
 distancesupto1500ft.Withproperheadend
equipment, multiple Megapixel cameras can be used.
Coax:
• Distance:upto1,500ft.
• Connectivity:BNC,RG-59/Uorsimilar.
LED Indicators:
• BlueLED-Coaxlinkconnection.
• YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
• GreenLED-Power.
Environmental:
• OperatingTemperature:
14ºF to 122ºF (---10ºCto+50ºC).
• StorageTemperature:
--22ºto158ºF(---30ºto+70ºC)Storage.
• Humidity:20to85%,non-condensing.
Electrical:
• BTU/Hr.:
 - VDC:1.69-4.46BTU/Hr.
Electrical (cont’d):
• BTU/Hr.:
 - VAC:2.46-3.07BTU/Hr.
Accessories:
• Compositevideocable(included)-enables
simultaneous composite video signal over the
same Coax.
• Powerconnector.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
 (SD)cameras.
• ExtendNetworklinkdistanceinanindustrial
environment.
• UpgradedeployedCCTVCoaxtoadigitalnetwork
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enablessimultaneoustransmissionofcompositeand
digital IP video.
Mechanical:
• Lightweightmoldedfiberglassreinforcedpolyester
enclosure is corrosion resistant and does not contain
halogens.
• Dimensions(WxLxHapprox.):
 2.5”(63.5mm)x3.8”(96.52mm)x1”(25.4mm)
• Productweight(approx.):3.4oz.(0.10 kg).
• Shippingweight(approx.):5.4oz.(0.15kg).
Additional eBridge models:
• eBridge1CR: Single port ethernet receiver
(use with eBridge transceiver).
• eBridge1CRT: Single port ethernet receiver and
transceiver kit.
• eBridge4CR: Four (4) port ethernet receiver.
• eBridge16CR: Sixteen (16) port ethernet receiver.
eBridge1CT - IP over Coax Transceiver
Rev.DSeBridge1CT_08012013
Specifications
Overview
eBridge1CT
*slocisaregisteredtrademarkofIntersilCorporation.
Agency Approvals
UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
European Conformity
C-Tick Compliant
Z1409