Installation Guide

eBridge100TM - 1 -
PLUS
Overview:
eBridge100TM is a versatile dual solution Ethernet transceiver which transmits data at 100Mbps
full duplex and power over Coax cable or extended CAT5e cable in a PoE+ compliant format. An
eBridge100RM, eBridge400PCRM, eBridge800PCRM or eBridge1600PCRM receiver is pow-
ered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes
the PoE(+) compliant power over cable to the eBridge100TM transceiver which in turn passes this
power to an enabled IP Camera/device. This plug and play unit facilitates cost effective solutions
for IP devices that need to be installed at distances greater than 100m. It also provides a simple
way to replace legacy analog products with new IP devices over existing coax or structured cable.
Features:
Rev. 111413
Installation Guide
eBridge100TM - IP and PoE+ over
Coax or Extended Ethernet Cable Transceiver
I.T.E. 43KC
*See note on the bottom of page 2.
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Power Consumption (under maximum load):
• eBridge100TM: Powered by eBridge100RM,
eBridge400PCRM, eBridge800PCRM or
eBridge1600PCRM receiver.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5.
• Distance: up to 500m.
• Speed: 10/100BaseT, half/full duplex, auto
negotiation.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W)
Delivered to camera by eBridge100TM.
Power provided by eBridge100RM to
eBridge100TM by PoE protocol.*
• Throughput is rated to pass 100mbps of
data at distances up to 500m.
Coax from eBridge Receiver:
• Distance: up to 300m @ 100mbps.
CAT5e or Higher from eBridge100PRM:
• Distance: up to 500m @ 100mbps.
(Maximum Length of Coax or CAT5 Type
vs. Camera Power/PoE Class, pg. 4)
for power delivery.
LED Indicators:
• Yellow - PoE ON (by respective RJ45 jack).
• Yellow and Green LED (RJ45) IP Link
status, 10/100Base-T/active.
Environmental:
• Operating Temperature:
For 15W: -- 40ºC to +75ºC (--- 40ºF to 167ºF)
For 25W: -- 40ºC to +70ºC (--- 40ºF to 158ºF)
For 30W: --- 40ºC to +49ºC (-- 40ºF to 120.2ºF)
• Storage Temperature:
-- 40ºC to +75ºC (--- 40ºF to 167ºF).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog
CCTV installation.
• Works with Megapixel, HD720, HD1080
and VGA (SD) cameras (see note, pg. 2).
• Extend Network link distance in an
industrial environment over 610m
(see note, pg. 2).
• Upgrade deployed CCTV Coax to a digital
network in Retail, Casinos, Airports,
Schools, Hospitals, etc.
Mechanical:
• Dimensions (W x L x H approx.):
3.5” x 3.5” x 1”
(88.89mm x 88.89mm x 25.4mm)