Data Sheet

Specifications
AL600ULPD4 is a multi-output power supply/charger that converts a 115VAC,
60Hz input into four (4) 12VDC or 24VDC non power-limited outputs.
AL600ULPD4
Multi-Output Power Supply/Charger
Rev. DSAL600ULPD4_04232015
Overview
AL600ULPD4
Input:
Input 115VAC, 60Hz, 3.5 amp.
Output:
12VDC or 24VDC selectable output.
6 amp continuous supply current.
Four (4) fuse protected outputs.
Output fuses are rated @ 3.5 amp/250VAC.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Battery Backup:
Built-in charger for sealed lead acid or
gel type batteries.
Automatic switch over to stand-by battery
when AC fails.
Maximum charge current 0.7 amp.
Supervision:
AC fail supervision (form “C” contacts).
- Notification trigger is selectable for
30 seconds (factory set) or 6 hours.
Low battery supervision (form “C” contacts).
Battery presence supervision (form “C” contacts).
Visual Indicators:
AC input and DC output LED indicators.
Electrical:
Operating temperature: 0º C to 49º C ambient.
36.85 or 73.70 BTU/Hr.
System AC input VA requirement: 402.5VA.
Mechanical:
Enclosure Dimensions (H x W x D approx.):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
- Accommodates two (2) 12VDC/7AH batteries.
Product weight (approx.): 7.4 lbs. (3.36 kg).
Shipping weight (approx.): 8.4 lbs. (3.81 kg).
Agency Approvals
UL 294 UL Listed for Access Control System Units.
UL 1481 UL Listed Standard for Safety for Fire Protective Signaling Systems.
General Signaling Equipment
Evaluated to CSA Standard C22.2 No.205-M1983

Summary of content (2 pages)