User guide

0.17”
(4.32mm)
3.7”
(93.98mm)
4.26”
(108.2mm)
6.7”
(170.18mm)
7.0”
(177.8mm)
0.25”
(6.35mm)
Ø 0.156”
(3.96mm)
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Specifications
Agency Approvals
UL Recognized component for Access Control System Units (UL 294),
Standard for Safety for Fire Protective Signaling Systems (UL 1481).
AL600ULB
Board Dimensions (L x W x H) (approximate):
4.3” (109.22mm) x 7.0” (177.8mm) x 2.3” (58.42mm)
AL600ULB is a UL Recognized power supply/charger which converts a
28VAC/200VA input into a single 12VDC or 24VDC non-power limited output.
AL600ULB
Power Supply/Charger
Rev. DSAL600ULB_11142012
Overview
Input:
• Inputtwo(2)28VAC/100VA, 1 amp transformers.
Output:
• 12VDC or 24VDC selectable output.
•6ampcontinuoussupplycurrent.
• Filteredandelectronicallyregulatedoutput.
• Shortcircuitandthermaloverloadprotection.
Battery Backup:
• Built-inchargerforsealedleadacidor
gel type batteries.
• Automaticswitchovertostand-bybattery
when AC fails.
• Maximumchargecurrent0.7amp.
Supervision:
• ACfailsupervision(form“C”contacts).
• Lowbatterysupervision(form“C”contacts).
• Batterypresencesupervision(form“C”contacts).
Visual Indicators:
• ACinputandDCoutputLEDindicators.
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• 36.85or73.70BTU/Hr.
• SystemACinputVArequirement:230VA.
Mechanical:
• Productweight(approx.):1.17 lbs. (0.53 kg).
• Shippingweight(approx.):1.25lbs.(0.57kg).