Installation Instructions

- 2 - AL600X220 Series Installation Guide
Overview:
Altronix AL600X220 is a power supply that converts a nominal 220VAC (working range 198VAC-256VAC),
50/60Hz input to a 12VDC or 24VDC regulating output (see specifications below). The AL600X220 is the
base power supply unit for the multi-output power supply/charger series: AL600PD4220, AL600PD4CB220,
AL600PD8220, AL600PD8CB220, AL600XPD16220, AL600XPD16CB220 (Refer to AL600X220 Series Power
Supply Configuration Reference Chart below).
AL600X220 Series Power Supply Configuration Reference Chart:
Altronix
Model Number
Accessory
Power
Distribution
Module(s) Number of Outputs Fused Outputs PTC Outputs (auto-resettable) 12VDC or 24VDC Total Output Current (A) Individual Output Rating (A)
Power
Supply
Input
Fuse
Rating
Accomodates
Stand-by
Batteries
AL600X220
– 1 – –
6A
6A
5A/250V
Two (2) 12VDC/7AH
AL600XX220
Two (2) 12VDC/12AH
AL600PD4220
PD4
4
P
– 3.5A
Two (2) 12VDC/7AH
AL600XPD4220
Two (2) 12VDC/12AH
AL600PD4CB220
PD4CB –
P
2.5A
Two (2) 12VDC/7AH
AL600XPD4CB220
Two (2) 12VDC/12AH
AL600PD8220
PD8
8
P
– 3.5A
Two (2) 12VDC/7AH
AL600XPD8220
Two (2) 12VDC/12AH
AL600PD8CB220
PD8CB –
P
2.5A
Two (2) 12VDC/7AH
AL600XPD8CB220
Two (2) 12VDC/12AH
AL600XPD16220
Two (2) PD8
16
P
– 3.5A Two (2) 12VDC/12AH
AL600XPD16CB220
Two (2) PD8CB –
P
2.5A Two (2) 12VDC/12AH
Do not exceed total output rating of 6A per unit.
Specifications:
Agency Listing:
• CE European Conformity.
Input:
• Input 220VAC (working range 198VAC-256VAC),
50/60Hz, 1.5A.
Output:
• 12VDC or 24VDC selectable output(s).
• 6A continuous supply current at 12VDC or 24VDC.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.7A.
• Zero voltage drop when switched over to
battery backup.
Additional Features:
• AC input, DC output, and BAT trouble
LED indicators.
• Power supply, enclosure, cam lock,
and battery leads.
• All models are available in a red enclosure
(add an “R” suffix to the part # e.g.
AL600PD8R220).
Power Supply Output Specifications:
Output Switch Position
12VDC SW1 - ON (Fig. 1b, pg. 3)
24VDC SW1 - OFF (Fig. 1b, pg. 3)
ON
OFF - 24V
ON - 12V