Installation Instructions Owner manual

- 2 - AL400X220series
Overview:
The AL400X220 is a power supply that converts a 220VAC 50/60Hz input, to a 12VDC or 24VDC regulating output,
(see specifications below).
The AL400X220 is the base power supply unit for the multi-output power supply/charger series: AL400PD4220,
AL400PD4CB220, AL400PD8220, AL400PD8CB220, AL400XPD16220, AL400XPD16CB220
(Refer to AL400X220 Series Power Supply Configuration Reference Chart below).
AL400X220 -1--43
AL400PD4220 PD4A
4 x - 3.5 3
AL400PD4CB220 PD4ACB 4 - x 2.5 2.5
AL400PD8220 PD8A 8 x - 3.5 3
AL400PD8CB220 PD8ACB 8 - x 2.5 2.5
AL400XPD16220 16 x - 3.5 3
AL400XPD16CB220 16 - x 2.5 2.5
Do not e
xceed total output rating of 4 amp @ 12VDC or 3 amp @ 24VDC per unit.
AL400X220 Series Power Supply Configuration Reference Chart:
Altronix
Model Number
Accessory Power
Distribution
Module(s)
Number of Outputs
Fused Outputs
PTC Outputs
12VDC Per Output
Current (amp)
24VDC Per Output
Current (amp)
Input:
• Input 220VAC 50/60Hz, 1.45 amp.
• AC input and DC output LED indicators.
Output:
•
12VDC or 24VDC selectable output.
• 4 amp total supply current at 12VDC
or 3 amp total suppl
y cur
rent at 24VDC.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch o
ver to stand-by battery when
AC fails.
•
Maximum charge current .7 amp.
• Zero voltage drop when switched over to battery backup.
Supervision:
• AC fail supervision (form "C" contacts).
•
Lo
w batter
y super
vision (form "C" contacts).
•
Batter
y presence super
vision (for
m “C” contacts).
Additional Features:
• Power supply, enclosure, cam lock and battery leads.
• All models are available in red enclosure
(add an “R” suffix to the part # e.g. AL400PD8220).
Specifications:
Two (2)
PD8ACB
Two (2)
PD8A