AL400ULXJ Power Supply/Charger Installation Guide For a grey enclosure, add an “G” suffix to the part number Rev.
Overview: The AL400ULXJ is a power supply that converts a 115VAC / 60Hz input, to a 12VDC or 24VDC regulating output. Specifications: Output (cont’d): Agency Listings: • UL Listed for Access Control Systems (UL294), Power Supplies for use with Burglar-Alarm Systems (UL603), Hospital Signaling and Nurse Call Equipment (UL1069), Power Supplies for Fire Protective Signaling Systems (UL1481), • CSFM - California State Fire Marshal Approved. • NFPA 72 Compliant.
Stand-by Specifications (total current shown): Output 12VDC/40AH Battery 24VDC/12AH Battery 24VDC/40AH Battery 4hr. of Stand-by & 5 Minutes of Alarm Stand-by = 4.0 amp Alarm = 4.0 amp 4hr. of Stand-by & 15 Minutes of Alarm Stand-by = 4.0 amp Alarm = 4.0 amp ----------- ----------- Stand-by = 3.0 amp Alarm = 3.0 amp Stand-by = 3.0 amp Alarm = 3.0 amp 24hr. of Stand-by & 5 Minutes of Alarm Stand-by = 1.0 amp Alarm = 4.0 amp Stand-by = 200mA Alarm = 3.0 amp Stand-by = 1.0 amp Alarm = 3.0 amp 60hr.
LED Diagnostics: Red (DC) ON ON OFF OFF Green (AC) ON OFF ON OFF Power Supply Status Normal operating condition. Loss of AC, Stand-by battery supplying power. No DC output. Loss of AC. Discharged or no stand-by battery. No DC output. Terminal Identification: Terminal Legend L, G, N -- DC + AC Fail NC, NC, NO Function/Description Connect 115VAC 60 Hz. to these terminals: L to hot, N to Neutral, G to ground. 12VDC @ 4 amp or 24VDC @ 3 amp continuous power-limited output. Indicates loss of AC power, e.g.
