Installation Guide

- 2 - AL400ULX series
Overview:
The AL400ULX is a power supply that converts a 115VAC / 60Hz input to a 12VDC or 24VDC regulating output (see
specifications below). The AL400ULX is the base power supply unit for the UL Listed multi-output power supply/charger
series: AL400ULPD4, AL400ULPD4CB, AL400ULPD8, AL400ULPD8CB, AL400ULXPD16, AL400ULXPD16CB
(Refer to AL400ULX Series Power Supply Configuration Reference Chart below).
AL400ULX Series Power Supply Configuration Reference Chart:
Altronix
Model Number
Accessory Power Distribution Module(s) Number of Outputs Fused Outputs PTC Outputs 12VDC Total Output Current (A) 24VDC Total Output Current (A) Individual Ouput Rating (A) Power Supply Input Fuse Rating Power Supply Ouitput Fuse Rating
Agency
Listings
UL Listings and
File Numbers
AL400ULX
AL400ULXX
AL400ULXR
---- 1
--- ---
4 3
---
5A/
250V
15A/
32V
UL File # S4707
UL 294
UL Listed for Access Control
System Units.
UL 603
UL Listed Standard for Power
Supplies for Use with Burglar-
Alarm Systems.
UL 1069
UL Listed Hospital Signaling
and Nurse Call Equipment.
UL 1481
UL Listed Standard for Safety
for Fire Protective
Signaling Systems.
“Signal Equipment”
Evaluated to
CSA Standard C22.2
No.205-M1983
AL400ULPD4
PD4UL
4
x
---
4 3
3.5
5A/
250V
15A/
32V
AL400ULPD4CB
PD4ULCB
---
x 2.5
AL400ULPD8
PD8UL
8
x
---
3.5
5A/
250V
15A/
32V
AL400ULPD8CB
PD8ULCB
---
x 2.5
AL400ULXPD16
Two (2)
PD8UL
16
x
---
3.5
5A/
250V
15A/
32V
AL400ULXPD16CB
Two (2)
PD8ULCB
---
x 2.5
Do not exceed total output rating of 4A @ 12VDC or 3A @ 24VDC per unit.
Specifications:
Power Supply Output Specifications:
Output Switch Position
12VDC SW1 - ON (Fig. 1c)
24VDC SW1 - OFF (Fig. 1c)
Input:
• Input 115VAC / 60Hz, 3.5A.
• AC input and DC output LED indicators.
Output:
• Class 2 Rated power-limited output(s).
• 12VDC or 24VDC selectable output.
Burglar Alarm Applications (UL 603):
12VDC = 10VDC-13.2VDC.
24VDC = 20VDC-26.4VDC.
• 4A total supply current at 12VDC or
3A total supply current at 24VDC.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
• Output fuse rated at 15A/32V.
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when
AC fails.
• Maximum charge current 0.7A.
• Zero voltage drop when switched over to battery backup.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery and battery presence supervision
(form “C” contacts).
Additional Features:
• Power supply, enclosure, cam lock and battery leads.
• All models are available in red enclosure
(add an “R” suffix to the part # e.g. AL400ULPD8R).
Altronix Corp.
140 58th St. Brooklyn, NY
California
State Fire
Marshal
NYC
Dept. of
Buildings
Factory
Mutual
Approved
9B98
9B98
9B98
9B98