Data Sheet

Specifications
Input:
• Input 115VAC, 60Hz, 4.2 amp.
• Input fuse rated @ 3.5 amp/250V.
Output:
• 24VDC output.
• 10 amp of continuous supply current for
Access Control applications.
• 8 amp of continuous supply current for
Fire Alarm applications.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 3.6 amp.
Supervision:
• AC fail supervision (form “C” contacts).
- Notification trigger is selectable for
30 seconds (factory set) or 6 hours.
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• 122.84 BTU/Hr.
• System AC input VA requirement: 483VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
- Accommodates up to two (2) 12VDC/12AH batteries.
• Product weight (approx.): 10.1 lbs. (4.58 kg).
• Shipping weight (approx.): 11.4 lbs. (5.17 kg).
AL1024ULXR is a power supply/charger that converts a 115VAC, 60Hz input
into a single 24VDC non power-limited output.
AL1024ULXR
Power Supply/Charger
Rev. DSAL1024ULXR_05052015
Overview
Agency Approvals
UL 294 UL Listed for Access Control
System Units.
UL 1481 UL Listed Standard for Safety for
Fire Protective Signaling Systems.
MEA - NYC Department of
Buildings Approved.
CSFM - California State Fire
Marshal Approved.
FM - Factory Mutual Approved.
Altronix Corp.
140 58th St. Brooklyn, NY
General Signaling Equipment
Evaluated to CSA Standard C22.2
No.205-M1983
AL1024ULXR