Data Sheet

Board Dimensions (W x L x H) (approximate):
4.5” x 8.4” x 1.9” (114.427mm x 213.36mm x 49.657mm)
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Ø
0.156”
(3.96mm)
3.7”
(93.98mm)
0.5”
(12.7mm)
6.7”
(170.18mm)
0.75”
(19.01mm)
4.5”
(114.3mm)
8.4”
(213.36mm)
UL Recognized component for Access Control System Units (UL 294)
Standard for Safety for Fire Protective Signaling Systems (UL 1481).
Agency Approvals
Specifications
AL1024ULXB2 is a UL Recognized power supply/charger that converts a
115VAC 60Hz input into a single 24VDC non power-limited output.
AL1024ULXB2
UL Recognized Power Supply/Charger
Rev. DSAL1024ULXB2_05052015
Overview
Input:
• Input 115VAC / 60Hz, 4.2 amp.
Output:
• 24VDC output.
• 8 amp continuous supply current with 10 amp
supply current during alarm.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Maximum Ripple: 250mV P/P.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current 3.6 amp.
• Automatic switch over to stand-by battery
when AC fails.
• Zero voltage drop when switched over to
battery backup.
Visual Indicators:
• AC input and DC output LED indicators.
Supervision:
• AC fail supervision (form “C” contacts).
- Notification trigger is selectable for
30 seconds (factory set) or 6 hours.
• Low battery and battery presence supervision
(form “C” contacts).
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• 98.27 BTU/Hr.
• System AC input VA requirement: 483VA.
Mechanical:
• Product weight (approx.): 1.15 lbs. (0.52 kg).
• Shipping weight (approx.): 1.45 lbs. (0.66 kg).
AL1024ULXB2