Installation Instructions

- 2 - AL1012X220 Series Installation Guide
Overview:
Altronix AL1012X220 is a power supply that converts a nominal 220VAC (working range 198VAC-256VAC)
50/60Hz input to a 12VDC output (see specifications).
AL1012X220 is a base unit for a series of multi-output power supply/chargers including: AL1012XPD4220,
AL1012XPD4CB220, AL1012XPD8220, AL1012XPD8CB220, AL1012XPD16220, AL1012XPD16CB220
(Refer to AL1012X220 Series Power Supply Configuration Reference Chart below).
AL1012X220 Series Power Supply Configuration Reference Chart:
Altronix
Model Number
Accessory Power
Distribution
Module(s)
Number
of
Outputs
Fused
Outputs
PTC Outputs
(auto-resettable)
Individual
Output
Rating (A)
AL1012X220
- 1 – – 10A
AL1012XPD4220
PD4
4
P
– 3.5A
AL1012XPD4CB220
PD4CB –
P
2.5A
AL1012XPD8220
PD8
8
P
– 3.5A
AL1012XPD8CB220
PD8CB –
P
2.5A
AL1012XPD16220
Two (2) PD8
16
P
– 3.5A
AL1012XPD16CB220
Two (2) PD8CB –
P
2.5A
Stand-by: 15 minutes of Stand-by at 10A.
Specifications:
Agency Listing:
• CE European Conformity.
Input:
• Input 220VAC (working range 198VAC-256VAC),
50/60Hz, 1.3A.
• AC input and DC output LED indicators.
Output:
• 12VDC output.
• 10A total supply current at 12VDC.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
Battery Backup:
• Maximum charge current 0.7A.
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Zero voltage drop when switched over to
battery backup.
Added Features:
• Power supply, enclosure, cam lock and
battery leads.
Enclosure Dimensions (H x W x D):
15.5” x 12” x 4.5”
(393.7mm x 304.8mm x 114.3mm)