AL1012ULX Series Power Supply/Charger Installation Guide Models Include: • AL1012ULX - Single Output • AL1012ULXPD4 - Four (4) Fused Outputs • AL1012ULXPD4CB - Four (4) PTC Outputs • AL1012ULXPD8 - Eight (8) Fused Outputs • AL1012ULXPD8CB - Eight (8) PTC Outputs • AL1012ULXPD16 - Sixteen (16) Fused Outputs • AL1012ULXPD16CB - Sixteen (16) PTC Outputs Rev.
Overview: The AL1012ULX is a power supply that converts a 115VAC / 60Hz input, to a 12VDC output (see specifications). The AL1012ULX is a base unit for a series of UL Listed multi-output power supply/chargers, including: AL1012ULXPD4, AL1012ULXPD4CB, AL1012ULXPD8, AL1012ULXPD8CB, AL1012ULXPD16, AL1012ULXPD16CB (Refer to AL1012ULX Series Power Supply Configuration Reference Chart).
Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only. 1. Mount unit in desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding.
LED Diagnostics: AL1012ULXB - Power Supply Board Red (DC) Green (AC) Power Supply Status ON ON OFF OFF ON OFF ON OFF Normal operating condition Loss of AC, Stand-by battery supplying power No DC output Loss of AC. Discharged or no stand-by battery. No DC output. PD4/PD4CB/PD8/PD8CB - Power Distribution Module Green Power Distribution Module Status ON Normal operating condition.
Fig. 1 CAUTION: De-energize unit prior to servicing. For continued protection against risk of electric shock and fire hazard replace fuse with the same type and rating 3.5A, 250V. Replace fuse cover before energizing. Non-power limited 3.
Power Distribution Module(s): Fig. 2 F1 F1 Used on PTC Models F2 F3 F4 1P, 2P, 3P, 4P = FUSED OUTPUTS 1N, 2N, 3N, 4N = COMMON OUTPUTS PD4 POWER DISTRIBUTING UNIT LED 1P 2P 1N COMMON 2N POWER 3P 3N 4P 4N INPUT OUTPUTS DC Output to devices From Power Supply Board (Factory Installed) 1 Used on PTC Models MAIN FUSE ALTRONIX CORP. MADE IN USA BROOKLYN, NY 11220 Fig.
Notes: AL1012ULXseries -7-
Enclosure Dimensions: 15.5”H x 12”W x 4.5”D 1.285 1.285 Altronix is not responsible for any typographical errors. Altronix Corp. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 web site: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
