Spec Sheet

ManualsBrandsAltronix ManualsAccess Control Power products4 PTC Outputs Power Supply/Charger, 12VDC

Specifications

AL1012ULXPD4CB is a multi-output power supply/charger that converts a

115VAC 60Hz input into four (4) 12VDC Class 2 Rated power-limited outputs.

AL1012ULXPD4CB

Multi-Output Power Supply/Charger

Rev. DSAL1012ULXPD4CB_05052015

Overview

AL1012ULXPD4CB

Input:

• Input 115VAC, 60Hz, 2.6 amp.

• Input fuse rated @ 5 amp/250V.

Output:

• 12VDC output.

• 10 amp continuous supply current.

• Four (4) Class 2 Rated PTC protected power-

limited outputs.

• Outputs are rated @ 2.5 amp.

• Filtered and electronically regulated output.

• Short circuit and thermal overload protection.

Battery Backup:

• Built-in charger for sealed lead acid or

gel type batteries.

• Automatic switch over to stand-by battery

when AC fails.

• Maximum charge current 0.7 amp.

Supervision:

• AC fail supervision (form “C” contacts).

- Notification trigger is selectable for

30 seconds (factory set) or 6 hours.

• Low battery supervision (form “C” contacts).

• Battery presence supervision (form “C” contacts).

Visual Indicators:

• AC input and DC output LED indicators.

Electrical:

• Operating temperature: 0º C to 49º C ambient.

• 61.42 BTU/Hr.

• System AC input VA requirement: 299VA.

Mechanical:

• Enclosure Dimensions (H x W x D approx.):

15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)

- Accommodates one (1) 12VDC/12AH batteries.

• Product weight (approx.): 11.15 lbs. (5.06 kg).

• Shipping weight (approx.): 12.05 lbs. (5.47 kg).

Agency Approvals

UL 294 UL Listed for Access Control System Units.

General Signaling Equipment

Evaluated to CSA Standard C22.2 No.205-M1983

Summary of content (2 pages)

PAGE 1
AL1012ULXPD4CB Multi-Output Power Supply/Charger Rev. DSAL1012ULXPD4CB_05052015 Overview AL1012ULXPD4CB is a multi-output power supply/charger that converts a 115VAC 60Hz input into four (4) 12VDC Class 2 Rated power-limited outputs. AL1012ULXPD4CB Specifications Supervision: Input: • Input 115VAC, 60Hz, 2.6 amp. • Input fuse rated @ 5 amp/250V. Output: • 12VDC output. • 10 amp continuous supply current. • Four (4) Class 2 Rated PTC protected powerlimited outputs. • Outputs are rated @ 2.5 amp.
PAGE 2
Enclosure Dimensions (H x W x D approximate): 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm) 1.5” (38.1mm) 4.615” (117.22mm) 4.615” (117.22mm) 1.5” (38.1mm) 1.75” (44.45mm) 1.375” (34.925mm) 1.125” (28.575mm) 1.25” (31.75mm) 4.5” (114.3mm) 12.23” (310.64mm) 1.1” (27.94mm) 0.91” (23.114mm) 1.5” (38.1mm) 4.5” (114.3mm) 1.1” (27.94mm) 1.25” (31.75mm) 0.91” (23.114mm) 2.0” (50.8mm) 1.5” (38.1mm) 15.5” (393.7mm) 2.0” (50.8mm) 5.0” (127.0mm) 5.0” (127.0mm) 1.1” (27.94mm) 1.25” (31.