SAFETY RELATED SYMBOLS External Connection CAUTION Always use proper ready-made insulated mains cabling (power cord). Failure to do so could result in shock/death or fire. If in doubt, seek advice, from a registered electrician. RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol, wherever used, alerts you to the presence of un-insulated and dangerous voltages within the product enclosure. These are voltages that may be sufficient to constitute the risk of electric shock or death.
Do not install this product near any direct heat source. Do not block areas of ventilation. Failure to do so could result in fire. Keep product away from naked flames. IMPORTANT SAFETY INSTRUCTIONS Read these instructions Follow all instructions Keep these instructions. Do not discard. Heed all warnings. Only use attachments/accessories specified by the manufacturer. Power Cord and Plug Do not tamper with the power cord or plug. These are designed for your safety.
Preface Dear Customer: Thank you for choosing the LTO TOPVerb 40 bit digital effects module which is the result of our LTO AUDIO TEAM's endeavours. For LTO AUDIO TEAM music and audio are much more than a job, they are a passion and an obsession! We have, in fact, been designing professional audio products for a number of years in cooperation with many of the world's major brands. The LTO line represents unparalleled analogue and digital products made by musicians, for musicians.
Table of Contents 1. Introduction ........................................................................................................... 5 2. Feature List ............................................................................................................ 5 3. Front and Back Panels Description ................................................................. 6 3.1 Control Panel (Front Panel) a. Program and Variations Selections b. Analog Levels c. Digital Saturation LED and Power LED 3.
1. Introduction Purchasing LTO TOPVerb, you purchased a very powerful effect processor, easy to use and contained in a very small box. LTO TOPVerb is divided in 16 effects algorithms and 16 variations for each of these algorithms. The variations modify the most important parameter of the current algorithm. The first 8 algorithms are reverb algorithms and have been designed following theory of different reverberation algorithms, taking care about the density and the body of the reverberated sound.
3. Front and Back Panels Description 3.1 Control Panel (Front Panel) R LTO TOPVerb TM 40 bit Digital Effects Module 1 HALL1 8 PLATE2 15 CHORUS / REV. 22 ~ 29 ~ 36 ~ 2 HALL2 9 TREMOLO 16 ROTARY 23 ~ 30 ~ 37 ~ 3 HALL3 10 CHORUS 17 ~ 24 ~ 31 ~ 38 ~ 4 SPRING1 11 FLANGER 18 ~ 25 ~ 32 ~ 39 ~ 5 SPRING2 12 DELAY 19 ~ 26 ~ 33 ~ 40 ~ 6 TAPE 13 DELAY / REV. 20 ~ 27 ~ 34 ~ 41 ~ 7 PLATE1 14 FLANGER / REV.
3.2 Analog Connections (Back Panel) A102 INPUT OUTPUT 9 VAC~ POWER FOOT SWITCH R L R L (MONO) a. Analog Inputs/Outputs - Inputs: These are 1/4" unbalanced phone jacks which connect to sources such as the effects sends of mixing console. They may be used with nominal input level. For mono application, use the Left / Mono input. The Left / Mono input jack is normal to the Right jack.
Insert the Power plug into the POWER input on the rear panel of the TOPVerb and plug the power adapter into an AC outlet. Turn on the power of the amplifier/mixer, and adjust the volume. 4.2. Installation a. Standard Use The TOPVerb may be placed almost anywhere: on a table, on top of an amp, next to a mixing console. If it will be on furniture, check the rubber feet provided to the bottom of the unit.
To Amplifier or Mixing Console From Instrument or Effects Send Left Input Right Output Left Output A102 INPUT OUTPUT 9 VAC~ POWER FOOT SWITCH R L (MONO) R L STEREO. Connect two audio cables to the [LEFT] and [RIGHT] INPUTS of the TOPVerb from a stereo source, and two other audio cables from the [LEFT] and [ RIGHT] OUTPUTS of the TOPVerb to a stereo amplification system or two mixer inputs.
in-line between the output of the mixing console and the input of a tape deck or power amplifier. This last setup would effect the entire mix output. 5. Preset Functions Descriptions 5.1 Presets 1). Hall 1 This is a large bright hall program with 54ms predelay, and can be used for almost anything. 2). Hall 2 This is a warmer hall program with 54ms predelay, and adds depth and character to acoustic instruments. 3).
11). Flanger Typical flanging effect, particularly effective on guitar and other string instruments. 12). Delay This program provides a delay of up to 650ms. The delay time can be adjusted in terms of delay and the decay time depends automatically from the delay time. This is a useful utility program which can add space to vocals or instruments. 13). Delay + Reverb The multi-effects program adds a room to the different delay presets. Particularly suitable for the use with vocals. 14).
02. Hall 2 No. Rev Time Room Size Rev. Type Pre-Delay Hi Damp 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3.6 3.6 3.6 3.6 4.0 4.0 4.0 4.0 4.5 4.5 4.5 4.5 6.1 6.1 6.1 6.1 16.22 17.25 18.28 19.31 20.33 21.36 22.39 23.42 16.22 17.25 18.28 19.31 20.33 21.36 22.39 23.42 Hall Hall Hall Hall Hall Hall Hall Hall Hall Hall Hall Hall Hall Hall Hall Hall 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 03. Hall 3 No. Rev Time Room Size Rev.
04. Spring 1 No. Rev Time Room Size Rev. Type Pre-Delay Hi Damp 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.70 0.70 0.70 0.70 1.20 1.20 1.20 1.20 2.10 2.10 2.10 2.10 2.90 2.90 2.90 2.90 8.00 9.03 10.06 11.08 12.11 13.14 14.17 15.19 16.22 17.25 18.28 19.31 20.33 21.36 22.39 23.42 Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.16 -0.
06. Tape No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Rev Time Room Size Rev. Type Pre-Delay Hi Damp Efx Connect type Tape Tape Tape Tape Tape Tape Tape Tape Tape Tape Tape Tape Tape Tape Tape Tape 100 98 96 94 92 90 88 86 84 82 80 78 76 74 72 70 D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) Efx Connect type 100 98 96 94 92 90 88 86 84 82 80 78 76 74 72 70 D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) D(D) 0.70 0.80 0.90 1.00 1.20 1.
08. Plates 2 No. Rev Time Room Size Rev. Type Pre-Delay Hi Damp 26.50 27.53 28.56 29.58 30.61 31.64 32.67 33.69 34.72 35.75 36.78 37.81 38.83 39.86 40.89 45.00 1.20 1.20 1.20 1.20 2.10 2.10 2.10 2.10 2.40 2.40 2.40 2.40 2.90 2.90 2.90 2.90 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 09. Tremolo No. Mod Freq. Amplit Mod Efx 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 3.6 3.9 4.2 4.5 5.
11. Flange No. Mod Freq. Amplit Mod Feedback L/R Dir Level Efx 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.07 0.07 0.07 0.16 0.16 0.16 0.16 0.16 0.22 0.33 0.57 0.76 1.00 1.33 1.42 1.88 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 67 75 82 60 72 82 89 92 82 82 82 82 82 82 82 82 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 Connect type C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) C(M) 12.
14. Flange/Rev No. Mod Freq. Pitch Depth Feedback L/R Dir Level Rev Time Room Size Hi Damp Connect type Efx 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.07 0.07 0.07 0.16 0.16 0.16 0.16 0.16 0.22 0.33 0.57 0.76 1.00 1.33 1.42 1.88 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 15. Chorus/Rev Delay R/L No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.10 0.21 0.32 0.60 0.76 0.96 1.37 2.16 0.11 0.94 1.61 2.13 1.78 2.50 3.33 3.
16. Rotary Mod Freq Pitch Depth Feedback Dir Level No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 4 1 4 1 4 1 4 3 5 3 5 3 5 3 5 10 20 30 40 50 60 70 80 10 20 30 40 50 60 70 80 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 P.S. A: 1 input - 2 mono output B: 2 input - 2 mono output C: 1 input - 1 stereo output - paralle.efx D: 1 input - 1 stereo output - series.
6.2 Specifications Electrical Input Frequency Response: +0.5 / -1.5 dB from 20Hz to 20 kHz S/N Ratio (process) 80 dB "A" wtg, 20 Hz-22kHz S/N Ratio (bypass) >90 dB "A" wtg, 20 Hz-22kHz THD+Noise: <0.
7. WARRANTY 7.1 Warranty registration card To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to purport a more effective and efficient after-sales warranty service.
e. In no event shall LTO be liable for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. f. This warranty gives you the specific rights, and these rights are compatible with the state laws, you may also have other statutory rights that may vary from state to state.
