User`s manual

12
6. PRESET LIST
Controllable Parameter
HALL1
Simulate a stage space of the sound.
Decay time
Pre-delay
Simulate a large acoustic space of the sound.HALL2
HALL3
SPRING1
Similar to the previous one, and also be used in
organs and guitar amplifiers.
SPRING2
Create more complex patterns that can add a
rhythmic quality to the instrument.
TAPE
Simulate the transducers sound like classic bright
vocal plate.
PLATE1
PLATE2
Simulate a warmer variation of the previous program,
sounding very well on acoustic guitar and strings.
TREMOLO
Provide an amplitude modulation of the input signal
and is used as "WET" effect.
CHORUS
FLANGER
DELAY
REV.+DELAY
REV.+FLANGER
Recreate the illusion of more than one instrument
from a single instrument sound.
Simulate to play with another person carrying
out same the notes on the same instrument.
Stereo flanger and large room reverb
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
NO. Preset Description
Rotary
Simulate the sound effect achieved by the
rotating horn speakers and a bass cylinder
Parameter Variable range
0.7~2.9s
54ms
Decay time
Pre-delay
3.6~6.1s
77ms
Decay time
Pre-delay
0.7~2.9s
0ms
Decay time
Pre-delay
0.7~2.9s
3ms
Decay time
Pre-delay
3.6~6.1s
9ms
Decay time
Pre-delay
0.7~6.1s
19ms
Decay time
Pre-delay
0.7~2.9s
19ms
Decay time
Pre-delay
1.2~2.9s
19ms
Rate
0.3~5.0Hz
30~650ms
0.07~1.88Hz
0.7~6.1s
1.0~5.0Hz
Simulate a medium bright hall with no pre-delay
of the sound.
Suitable for organs and also be used in organs
and guitar amplifiers.
Reproduce the sound input on the output after a
lapse of time.
Delay with room effect
REV.+CHORUS
Stereo chorus and large room reverb
Rate
0.1~3.5Hz
Rate
0.07~1.88Hz
Decay period
Decay period
Rev.decay time
30~650ms
0.7~6.1s
Flanger Rate
Rev.decay time
Chorus rate
Rev.decay time
0.3~3.5Hz
0.7~6.1s
Rate
3
3. CONTROL ELEMENTS
SPOTLIGHT
Rear Panel
8 POWER CONNECTOR
To Plug-in the AC adaptor included with your Verb II.
9 INPUT
These 1/4" unbalanced phone jacks connect to sources such as the effects sends of
mixing console. They may be used with a nominal input level up to 9 dBu. For mono
application, use the Left (Mono) input. In this case, the Left (Mono) input jack is in
parallel to the Right jack. This means that when nothing is plugged into the Right input
jack, the signal present at the Left (Mono) input is routed to the Right input as well.
3. CONTROL ELEMENTS
10 OUTPUT
These are 1/4" unbalanced phone jacks to connect your Verb II to the effects returns
on a mixing console or power amplifier inputs.
11 BYPASS
This is a 1/4" phone jack to connect an optional footswitch. With the footswitch is in
"ON" position, you will hear the Input signal without any digital processing. When the
footswitch is in "OFF" position, you will hear the processed signal with the amount of
DRY/WET proportion you have set from the front panel.
11
10
9
8
LEFT RIGHT LEFT(MONO) RIGHT
A102
9VAC
POWER
~
BYPASS
OUTPUT
INPUT