User`s manual

9
Utility Button(13): To access the UTILITY Menu it's necessary to push the UTILITY Button (13).
If the VERB is already working on Utility Menu (Utility LED (4) = ON) each further use of the button will have
no effect.
Using the Utility Menu is possible to access the following functions:
Load Preset: this function allows the loading of one of the 128 available presets, where the first 64 presets
(1, 64), are factory presets, and the presets from 65 to 128 are the User's configurable presets and all not initia-
lized (Empty) at VERB selling time.
To Load a preset:
Select "Load Preset" using buttonsUP/DOWN
Press button to access the further sub menuENTER
Select the chosen preset using buttonsUP/DOWN
Press to load the preset or press button if you decide to not load anymore the presetENTER ESC
Once terminated the sequence above, on the display will appear the name of the selected preset and the system
will go back to the starting menu.
Store Preset: this function allows the storing on one of the 64 available memory locations the modified (using
the Editing Menu) user's preset, starting from one of the 64 available factory presets.
To Store a preset:
Select "Store Preset" using buttonsUP/DOWN
Press button to access the further sub menuENTER
Select the memory location (Empty or already occupied from a previous user's preset) where to store the new
user's preset using buttonsUP/DOWN
If you want to give up, press to go back to the main menu without storing the new preset otherwise pressESC
ENTER to store the new preset. The user can choose the identification name for the new preset using 6
characters max.
The blinking character show the character will be modified using the buttons. When the right characterUP/DOWN
appears, press enter to confirm the character itself and pass to the next one. Pressing before the 6 character,ESC
th
the old name will be maintained as name of the new preset.
Pressing as confirmation of the 6 character, the new preset will be stored with the new name. There isENTER
th
no possibility to correct a confirmed character, if necessary to change again the name, repeat the storing process
from the beginning.
Once terminated the sequence above, on the display the name of the new stored preset will appear and the
system will go back to the starting menu.
MIDI Setup: the MIDI SETUP utility allows the user to set up the VERB MIDI configuration. The configurable
MIDI parameters are:
MIDI Channel: allows to define the MIDI CHANNEL to associate to the VERB when connected to Remote
MIDI devices. When MIDI CHANNEL is set to OFF, the VERB will ignore each midi command coming from
the external midi devices.
MIDI Output: when this function is set as ON it is possible to ECHO on the MIDI output of the VERB all the
incoming MIDI messages.
Effect: this function allows to avoid the DIRECT signal percentage (Effect = WET) of the running preset, setting
the VERB in a mode useful for the "Send/Return" use of the VERB itself. When Effect =WET, the %Dir
field, normally available when in preset's editing, will be no longer accessible to the user. If Effect = Dry, the
%Dir field will be accessible to the user and will determine the percentage of direct signal mixed to the effected
one. Effect is a system's parameter and its action will affect all the running presets.
Output Attenuation This control allows the digital output volume setting. This parameter is a "system parameter"
and its modification acts on all the presets.
Digital Mix On/Off Button (14): The function activated and deactivated by this key, represents one of the most
powerful features of VERB.
VERB offers the possibility to mix Dry and Wet signals digitally or analogically. When Digital Mix ON/OFF key
is pressed and the related Digital Mix ON/OFF LED is on (red), VERB is allowing the Dry/Wet digital mixing,
where the Dry and Wet percentages are chosen by means of the "%dir" and "%eff", available within "EDIT MENU".