User`s manual

10
From Instrument or Effects Send
To Amplifier or Mixing Console
Right Input
Left OutputRight Output
Left Input
From Instrument or Effects Send
To Amplifier or Mixing Console
Left Input
Left Output
From Instrument or Effects Send
To Amplifier or Mixing Console
Left Input
OutputRight
Left Output
When connecting audio cables and/or turning power on and off, make sure that
all devices in your system have their volume controls turned down.
The Verb has two 1/4" unbalanced inputs and two 1/4" unbalanced outputs.
These input/output configuration may provide three different audio connections
options:
MONO. Connect an audio cable to the [LEFT] INPUT of the Verb from a
mono source, and another audio cable from the [LEFT] output of the Verb to
an amplification system or mixer input.
MONO IN, STEREO OUT. While still using a mono input, you could connect
two audio cables to the [LEFT] and [RIGHT] outputs of the Verb to a stereo
amplification system or two mixer inputs.
STEREO. Connect two audio cables to the [LEFT] and [RIGHT] INPUTS of
the Verb from a stereo source, and two other audio cables from the [LEFT]
and [ RIGHT] OUTPUTS of the Verb to a stereo amplification system or two
mixer inputs.
R
LTO
Hall 3
Plate 1
Plate 2
Room 2
Room 1
Room 3
Hall 2
Hall 1
OUTPUT
INPUT
MIX
VARIATIONS
010010010
SIGNAL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
POWER
Flange
Chorus
Tremolo
Delay/Rev
Delay
Chorus/Rev
Flange/Rev
Rotary
Verb
T M
24 32 BIT DIGITAL EFFECTS MODULE
ON OFF
R
LTO
Hall 3
Plate 1
Plate 2
Room 2
Room 1
Room 3
Hall 2
Hall 1
OUTPUT
INPUT
MIX
VARIATIONS
010010010
SIGNAL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
POWER
Flange
Chorus
Tremolo
Delay/Rev
Delay
Chorus/Rev
Flange/Rev
Rotary
Verb
T M
24 32 BIT DIGITAL EFFECTS MODULE
ON OFF
R
LTO
Hall 3
Plate 1
Plate 2
Room 2
Room 1
Room 3
Hall 2
Hall 1
OUTPUT
INPUT
MIX
VARIATIONS
010010010
SIGNAL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
POWER
Flange
Chorus
Tremolo
Delay/Rev
Delay
Chorus/Rev
Flange/Rev
Rotary
Verb
T M
24 32 BIT DIGITAL EFFECTS MODULE
ON OFF