Specifications

Abridged Command List
9
ABRIDGED COMMAND LIST
The parameter i is 0,1,or 2 to select counter A,B, or T
MODE
CM j Set COUNT to mode j; A,B(0), A-B(1), A+B(2) for preset T,or A FOR B preset(3).
CI i,j Set counter i to input j; 10 MHz(0), INP 1(1), INP 2(2), TRIG(3).
CP i, n Set counter i preSET to 1 <= n <= 9E11.
NP m Set Number of PERIODS in a scan to 1 <= m <= 2000.
NN Read current count period number or scan position.
NE j Set end of scan mode to mode j; START(1) or STOP (0).
DT x Set DWELL time to 2E-3 <= x <= 6E1 s or EXTERNAL(0).
AS j Set D/A to source j; A(0), B(1), A-B(2), A+B(3).
AM j Set front panel D/A to RANGE j; LOG(0) or LINEAR (1-7).
SD j Set DISPLAY to mode j; CONTINUOUS(0) or HOLD(1).
LEVELS
TS j Set TRIG to SLOPE j; RISE(0) or FALL(1).
TL v Set TRIG LVL to -2.000 <= v <= 2.000 V.
DS i,j Set DISC i to SLOPE j; RISE(0) or FALL(1).
DM i,j Set DISC i to mode j; FIXED(0) or SCAN(1).
DY i,v Set DISC i scan step to -0.0200 <= v <= 0.0200 V.
DL i,v Set DISC i LVL to -0.3000 <= v <= 0.3000 V.
DZ i Read current DISC i LVL (during scan).
PM k, j Set PORT k (1 or 2) to mode j; FIXED(0) or SCAN(1).
PY k,v Set PORT k (1 or 2) scan step to -0.500 <= v <= 0.500 V.
PL k,v Set PORT k (1 or 2) LVL to -10.000 <= v <= 10.000 V.
PZ k Read current PORT k (1 or 2) LVL (during scan).
GATES
GM i,j Set GATE i to mode j; CW(0), FIXED(1), or SCAN(2).
GY i,t Set GATE i DELAY scan step to 0 <= t <= 99.92E-3 s.
GD i,t Set GATE i DELAY to 0 <= t <= 999.2E-3 s.
GZ i Read current GATE i DELAY position (during a scan).
GW i,t Set GATE i WIDTH to 0.005E-6 <= t <= 999.2E-3 s.
FRONT PANEL
CS Count start, same as START key.
CH Count pause, same as STOP key while counting.
CR Count reset, same as STOP key pressed twice.
CK j Simulate key press j.
RR Rotate knob right (CW or UP) 1 step.
RL Rotate knob left (CCW or DOWN) 1 step.
SC Read cursor position. Left(0), right(1), or inactive(2).
MI j Set front panel to mode j; local(0), remote(1), locked-out(2). RS-232 only.
MS string Display string on menu line.
MS Return menu line to normal display.
MD j,k Display line k of menu j.
MM Read menu number of display (j).
ML Read menu line of display (k).