Technical data

5
1)
Options / model variants
POSEIDON 5
3 Before starting the cleaner
3.1 Setting up the cleaner CAUTION!
Never lift the cleaner alone. Al-
ways ask a second person to
help.
1. Before using the cleaner for
the first time, check it care-
fully to detect any faults or
damage.
2. In the event of any damage
contact your Nilfisk-Alto deal-
er immediately.
3. Check the oil level by lifting
off the cap. On level ground,
the oil should be just visible.
If necessary, add oil( see
chapter 9.4 for type of oil).
3.2 Fill up detergent tank
1)
1. Fill up detergent tank with
prediluted Nilfisk-Alto deter-
gent.
Capacity see chapter 9.4
Technical Data.
2. Pull detergent filter out of the
storage and put it through
the opening of the detergent
tank filler cap.
3.3 Connecting the high
pressure hose
3.3.1 Machines without high
pressure hose reel
1. Put the quick connector of
the high pressure hose onto
the nipple on the cleaner.
NOTE!
The maximum length of
high pressure hose is 50m.
3.3.2 Machines with high
pressure hose reel
1. Put the quick connector of
the high pressure hose (A)
onto the nipple on the axle.
2. Put the high pressure hose
into the hose guide (B) and
fix it with the clip.
3. Release the brake (C) on the
hose reel and wind up the
high pressure hose.
A
B
C