Technical data

15
1)
Options / model variants
POSEIDON 5
Fault Cause Remedy
No detergents drawn in > Injector is dirty or suction
hose is blocked
• Clean
> Detergent tank empty • Top up detergent tank
> The cap on the FlexoPower-
Jet nozzle is not set to low
pressure
• see chapter 4.6
9 Further information
9.1 Recycling the cleaner Make the old cleaner unusable
immediately.
1. Unplug the cleaner and cut
the power cord.
Do not discard of electrical ap-
pliances with household waste.
As specified in European Direc-
tive 2002/96/EC on old electrical
and electronic appliances, used
electrical goods must be col-
lected separately and recycled
ecologically. Contact your local
authorities or your nearest deal-
er for further information.
9.2 Guarantee Our general conditions of busi-
ness are applicable with regard
to the guarantee.
Subject to change as a result of
technical advances.
9.3 EU Declaration of
Conformity
EU Declaration of Conformity
Product: High Pressure Cleaner
Type: POSEIDON 5
Description: 400 V 3~, 50 Hz, IP X5
The design of the unit corre-
sponds to the following perti-
nent regulations:
EC Machine Directive 98/37/EEG
EC Low-voltage Directive 73/23/EEG
EC EMV Directive 89/336/EEG
Applied harmonised standards: EN 12100, EN 60335-2-79
EN 55014-1, EN 55014-2, EN
61000-3-2
Applied national standards and
technical specifi cations:
DIN EN 60335-2-79
Dipl. Ing. Wolfgang Nieuwkamp
Tests and approvals
ALTO Deutschland GmbH
Guido-Oberdorfer-Straße 2-8
D-89287 Bellenberg
Bellenberg, 01.06.2006