Technical data

13
1)
Options / model variants
POSEIDON 5
7.2 Maintenance work
7.2.1 Cleaning water inlet
filter
A water filter is fitted on the water
inlet to prevent large particles of
dirt from entering into the pump.
1. Unscrew the quick-release
connection if mounted.
2. Remove the filter and rinse it.
Replace damaged filter. Re-
place damaged filter.
7.2.2 Checking the pump oil
level
1. Check the oil level by lifting
off the cap. On level ground,
the oil should be just visible.
If necessary, add oil (see
chapter 9.4 for type of oil).
7.2.3 Changing the pump oil
1. Before changing the oil, al-
low the cleaner to become
warm.
2. Remove cap.
3. Loosen and remove drain
plug. Drain the oil into a suit-
able container(min. 1 litre)
and dispose the oil in compli-
ance with regulations.
4. Fit drain plug and refill with
oil according to chapter 9.4
Technical Data.
5. Oil should just be visible
in the oil container at level
ground.
6. Fit the cap.
CAUTION!
Special pump oil is required if
the cleaner is used near food.
Please consult your Nilfisk-Alto
dealer.