User`s manual

L
R
LEVEL
MAIN MIX OUTPUT (BAL/UNBAL)
MAIN INSERT
L
R
+4dB
-30dB
DFX OUT FOOT SWITCH PHONES
B
LAMP
A
MONO OUTPUT
LEVEL
-
8
+15
12V 0 5A.
This 1/4" socket is used to output the effect signal that comes from internal DSP module.
4.30 DFX OUT
51
52
4.31 FOOTSWITCH
This 1/4" socket can be used to connect an external footswitch to turn on/off the onboard effect module.
17
These sockets will send out the monitor signal to a pair of headphones.
53
4.32 PHONES
4.33 LAMP
54
This lovable LAMP is very convenient for your operation, it is located in the top right corner of the front panel, and
provides the 12V socket that can drive standard TNC-type lamp.
For effectively operating your PM-12, we recommend you use the generalized gooseneck lamps, the GL-SQ and
GL-RO are both options.
This knob sets the level of mono mix output signal, which can be varied from - to +15dB.
4.35 MONO LEVEL Control
56
4.34 MONO OUTPUT
55
This 1/4" socket is used to serve to connect an addition PA system or an active woofer, which can provide the mono
signal to drive the speakers laying aside the stage to compensate for the monitor speakers.
51 52
53
54
55
56
4.36 MAIN MIX OUTPUT
57
This stereo output is supplied with both the XLR and 1/4" phone
sockets and it is controlled by the main mix level fader.
4.37 LEVEL Switch
58
57
58
59
This button lets you select proper level to match the input of the
device that you are ready to connect. Engage this button to reduce
the output level from MAIN MIX OUTPUT by 30dBu, it used to
match the semipro -30dBu device, on the contrary, to match the
professional +4dBu device.