User`s manual

2
1. INTRODUCTION
Though your PBM8.350 UM is very easy to operate, we strongly recommend you
to go through each section of this manual carefully, in this way you will get the
best out of your PBM8.350 UM.
The PBM8.350 UM 8-channel stereo powered mixer with DSP and MP3 player is
packed with some key features. For example: there are six MIC/line inputs which
provided with ultra low noise microphone pre-amplifiers and phantom power at
+48V plus two stereo inputs, each channel features a 3-band equalizer, two aux
sends, pan and level control. The master section includes stereo return, 2-track
input/output for playing back stereo devices and to record your mix, handy
equalizers for main mix and monitor, 256 position multieffect and USB port which
can be connected to U disk to play files of MP3 format and so on.
Thank you very much for expressing your confidence in LTO products by
purchasing LTO PBM8.350 UM 8-channel stereo powered mixer with DSP and
MP3 player . The PBM8.350 UM is a professional, powerful mixer, which provides
the state of the art digital amplifier technology specifically. You will get a smooth,
accurate , very natural and open sound from this apparatus, it is really ideal for
gigs, recording and fixed PA installations.
2. THE CONCEPT BEHIND2.FEATURES
The PBM8.350 UM 8-channel stereo powered mixer with DSP and MP3 player
USB port is designed for professional application. It provides the following features:
Output connector: 6.3 jack + 4 way-speakon
9-band graphic EQ for MAIN / MONITOR
Digital amplifier technology, offering high power and a very dynamic sound
8 MIC/line input channels with gold plated XLRs and balanced LINE inputs
2 Stereo input channels with balanced TRS jacks
Ultra-low noise discrete MIC preamps with +48V phantom power
Extremely high headroom offering more dynamic range
Each input channel with -20dB PAD, PAN and level control
3-band equlizer on input channels
256 position multieffect
2-track recording IN/OUT (phono)
Headphone output
USB port for MP3 player
2 350 watt RMS amplifiers (For PBM8.350 UM)
2 AUX sends for built-in or external effects, on-stage monitor mix, or headphone mixing
7.TECHNICAL SPECIFICATIONS
Mono input channels
Stereo input channels
Impedances
Equalization
DSP Section
Microphone input
Microphone input
electronically balanced, discrete input configuration
electronically balanced, discrete input configuration
Frequency response
Frequency response
20Hz to 50kHz, + - 3dB
20Hz to 50kHz, + - 3dB
Distortion (THD & N)
Distortion (THD & N)
0.01% at 1kHz
0.01% at 1kHz
Sensitivity
Sensitivity
-40dBu
-40dBu
SNR (Signal to Noise Ratio)
SNR (Signal to Noise Ratio)
92dB
>92dB
Line input
PAD
PAD
Phantom power
Phantom power
-20dB
-20dB
+48V with switch control
+48V with switch control
Electronically balanced
Frequency response
20Hz to 50kHz, + - 3dB
Distortion (THD & N)
0.01% at 1kHz
Sensitivity
Sensitivity
-20dBu
-20dBu
Line input
Unbalanced
Frequency response
20Hz to kHz, 3dB
50 + -
Distortion (THD & N)
0.01% at 1kHz
Microphone input
1.4kohm
All other inputs
10kohm or greater
Tape out
1kohm
All other output
120ohm
High
+ - 15dB @12kHz(mono) + - 15dB @12kHz(stereo)
+ - 12dB @2.5kHz(mono) + - 12dB @2.5kHz(stereo)
+ - 15dB @80kHz(mono) + - 15dB @80kHz(stereo)
Mid
Low
A/D and D/A converters
24 bit
DSP resolution
24 bit
Type of effects
Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY, REVERB+CHORUS,
Presets
256
Controls
16-position PRESET Selector
16-position VARIATION selector
CLIP LED
MUTE SWITCH with LED indicator
REVERB+FLANGER combina tions
21