User`s manual

TAPE IN TO
TAPE
RIGHT
LEFT
MAIN
CH7/8/
IN
OUT
MP3 IN TO
OFF
CH9/10/
00
03
:
08
MP3 USB REP
ALL
MP3 PLAYER
13
10
SPOT
LIG
HT
4. CONTROL ELEMENTS
This is a stereo phone type output jack, it is used to send out the monitor
signal to a pair of headphones.
HEADPHONE OUT Jack
AUX2 OUT Jack
STEREO RTN. Jack
The phone jack is used to output the line level signal of
AUX2 bus. Generally, it is used to connect external
effects unit, but it is should be used for stage
monitors too.
Use the stereo phone jack to return the sound of an
effect unit to the main mix. You can also use it as a
extra auxiliary stereo input.
Pushing this switch to right will route the signal from
TAPE IN to CH7~8 path, and the signal will be affected
by channel level control and main level control, while to
left will route the signal to main mix bus, the signal will
be affected only by main level control.
Pushing this switch to right will route the signal from MP3 IN to CH9~10
path, MIC and LINE of CH9~10 path are disconnected ,and the signal will be
affected by channel level control and main level control, while to left will
disconnect the signal of MP3 IN to CH9~10 path, MIC and LINE input of
CH9~10 path are connected.
TAPE IN TO Select Switch
Your PBM8.350 UM features dual RCA jacks for 2-
track in (left and right). If you wish to listen to your mix
from a tape recorder, DAT or cassette, please use
these tape input jacks. Depending on the setting of
TAPE TO select switch, you can assign the signal
from the tape recorder (DAT or cassette),as well as a
CD player to CH7~8 path or main mix bus.
2-TRACK IN
Your PBM8.350 UM features dual RCA jacks for 2-track
out (left and right). Via these jacks, you can route the
main mix signal into a tape recorder or DAT for recording.
2-TRACK OUT
MP3 IN TO Select Switch
SPOT
LIG
HT
4. CONTROL ELEMENTS
4.6 MP3 Section
USB PORT
For connecting with USB memory.
PRE
In pause state, press this button it will go to the previous song and keep
in pause state. In play state, press this button it will go to the previous song
and start playing.
In pause state, press this button it will go to the previous song and keep in
pause state. In play state, press this button , it will go to the previous song
and start playing.
The file system of USB memory for USB-MP3 player is FAT16 and FAT32.The player
can only decode MP3.It can have 7 rank subordinate folders at most ,and the
maximum quantity of folders within MP3 files is 24.In the whole USB memory ,the
total folders can not beyond 256(incluing those folders without MP3 songs).
NEXT
Press this button the player will change between the following four modes. REP
ALL means to repeat all songs in the memory, the mark on the screen is
REPEAT
.
REP1 means to repeat one song, the mark on the screen is Play in order
means to play the songs according to the order, the mark on the screen is
blank. Random play means to play the songs at random, the mark on the
screen is A.
.
allall
11
20
21
22
24
25
23
38
37
39 40
42 43
41
11
11
11
11
11
11
11
11
11
11
11
20
19
21
22
23
37
38
39
40
25
24
AUX2
OUT
STEREO
RTN