Operator`s manual

CLARKE TECHNOLOGY PB-12 Operator's Manual Page 6
Figure 5
Figure 6
Figure 7
Figure 8
How To Assemble The Machine (cont)
10. Remove the nut and one plain washer from the
locking cam. Leave one plain washer on the
locking cam. See figure 5
11. Raise the handle and align the holes.
See figure 6.
12. Insert the cam through the link arms and the
handle tube clamp. See figure 7.
13. Install the washer and the locking nut.
14. Install the solution hose around the outside of the
handle to the fitting on the handle tube.
See figure 8.
15. Install the vacuum hose. See figure 9.
Figure 9