owner's Manual REVO1 LINE ARRAY SPEAKER ENCLOSURES PASSIVE MODELS www.altoproaudio.com Version 1.0 OCT.
IMPORTANT SAFETY INSTRUCTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK PLEASE DO NOT REMOVE THE COVER OR THE BACK PANEL OF THIS EQUIPMENT. THERE ARE NO PARTS NEEDED BY USER INSIDE THE EQUIPMENT. FOR SERVICE, PLEASE CONTACT QUALIFIED SERVICE CENTERS. This symbol, wherever used, alerts you to the presence of un-insulated and dangerous voltages within the product enclosure. These are voltages that may be sufficient to constitute the risk of electric shock or death.
IN THIS MANUAL: 1. INTRODUCTION TO THE REVO1 SAT208P ........................................................................2 2. REVO1 SAT208P TECHNICAL SPECIFICATION ..................................................................3 3. INTRODUCTION TO THE REVO1 SUB118P........................................................................4 4. REVO1 SUB118P TECHNICAL SPECIFICATION ................................................................5 5. LAYOUT OF CONNECTOR PANEL REVO1 SAT 208P................
1. INTRODUCTION TO THE REVO1 SAT208P The REVO1 is a compact two-way passive, line array system, intended for use in arrays with fixed curvature, up to six cabinets of SAT208P. REVO1 is a versatile loudspeaker system for medium & large Indoor venues. it is suitable in small and medium outdoor scale application, or as a delay tower for large scale sound reinforcement system.
2. REVO1 SAT208P TECHNICAL SPECIFICATION Model No. Configuration Operating Frequency Range Frequency Response Maximum Peak SPL Power Rating (AES Standard) REVO1 SAT 208P Two-way, Passive or Bi-Amp, with a total of four speakers device 65 Hz/20 kHz (-10 dB) 77 Hz/18 kHz (+/-3 dB) 126 dB SPL (calculated) 400 W/800 W/1600W passive mode Bi-amp Low 400 W/800 W Bi-amp High 75 W/150 W 100 nominal, single unit 7.
3. INTRODUCTION TO THE REVO1 SUB118P The SUB118P is a vented subwoofer equipped with a single custom high power 18" Subwoofer with 4" high-power sandwich copper voice coil on fiberglass former, double spider, ceramic magnet, and weather resistant cone. The enclosure is made with a 18mm multi-layer plywood, finished with anti-scratch black paint, with a strong perforated metal grille, two metal handles, one pole socket for satellite and four wheels. Dimension Drawings for REVO1 SUB118P 792.
4. REVO1 SUB118P TECHNICAL SPECIFICATION Model No.
5. LAYOUT OF THE CONNECTOR PANEL REVO1 SAT208P 1 High Frequency Configurator (HFC) The High Frequency Configurator gives you the possibility to define the best sound pressure level in front of the audience. The HFC is included in the passive crossover and work only in Passive-Mode. The +3 dB position is normally used for the SAT208P that work in array, for covering the more distant audience. The 0dB is normally used for covering the nearest audience.
6. HIGH FREQUENCY CONFIGURATOR (HFC) 1 Medium Array Configuration The below is an example of applying the HFC in four SAT208P in array. In this particular configuration, the HFC on the top speaker is set at +3 dB, and the bottom speaker 0 dB. +3dB +3dB +3dB 0dB FLOOR 2 Small Array Configuration This is the example of the HFC application at two SAT208P in a small array, with tilted speaker set at +3 dB and the bottom speaker at 0 dB. Do not stack more than two SAT208P speaker on the pole.
7. REVO1 MAXIMUM ARRAY SIZE 1 REVO1 Array Frame The following table defines the maximum number of speakers that may be suspended using the REVO1 frame. A security design factor is maintained for the speaker configurations indicated in the table. Maximum quantity of REVO1 SAT208P in array Maximum quantity of REVO1 SUB118P in array 2xSAT 0 FB-1 array 3xSAT 4xSAT 5xSAT 6xSAT 1xSUB 1xSUB 0 Max 0 Max 2 Suspension Safety Warning Never exceed the maximum recommended speaker cabinet listed on the table.
8.
9. Speaker management: MAXIDRIVE3.4+ ! USER PRESET:2S18+6208U13 REVO1 MAXIDRIVE3.
SATL6 Subwoofer REVO1 SUB118P SUBL3 SUBL4 REVO1 S AT208P SUBL1 SUBL2 LTO R IN 1 LINK 1 4 SL4 12 6 CH2 28 26 24 30 (dB) 22 6 CH3 12 16 18 20 28 26 24 30 (dB) 22 SIG CLIP PROT 6 CH4 12 16 18 20 28 26 24 30 (dB) 22 SIG CLIP PROT SATL1 ESC ENTER 24 B CLIP 24 12 6 LIMIT INPUT LEVEL A 18 12 6 CLIP CLIP MUTE 24 12 6 LIMIT 2 CLIP 24 12 6 LIMIT MUTE OUTPUT LEVEL 3 CLIP 24 12 6 LIMIT MUTE OUTPUT LEVEL 4 CLIP 24 12 6 LIMIT MUTE OUTP
12 SUBL1 SUBL2 Subwoofer REVO1 SUB118P REVO1 SAT208P SATL4 SATL3 SATL2 SATL1 LEFT ARRAY A102 30 (dB) CH1 CH2 6 18 26 24 28 30 (dB) 22 20 16 12 SIG CLIP PROT 26 24 28 22 20 18 SIG CLIP PROT 6 CH3 6 16 12 18 20 26 24 28 30 (dB) 22 SIG CLIP PROT CH4 6 16 12 18 20 26 24 28 30 (dB) 22 SIG CLIP PROT SBL1 SUB 1 14W Apparaten skall anslutas till SBR1 SUB 3 OFF ON PWR 3 1 TIDE DIGITAL IN 2 NEW PUSH jordat uttag nar den ansluts 95-240V 50/60Hz FUSE: 95-
SUBR1 Hardware for two REVO1 SAT208P 2 REVO1 SAT-HD-L per array 2 REVO1 SAT-HD-R per array Deploy in suspension or compression HOOK 10.
11. REVO1 LINE ARRAY HARDWARE PARTS 700 23 1 2 3 4 20.1 17.5 14.9 12.1 5 6 7 8 9 10 11 12 13 14 0.8 2.1 5 7.8 10.6 13.4 16.1 18.7 21.3 23.
12. CONTROL ELEMENTS: MAXIDRIVE3.4+ PROCESSOR Front Panel 5 2 PREV 12 8 NEXT ENTER CLIP PRESET 6 DELAY EDIT MODE CLIP CLIP CLIP CLIP CLIP CLIP LIMIT LIMIT LIMIT LIMIT LIMIT LIMIT 6 12 ESC 18 24 UTILITY A B INPUT LEVEL 6 6 6 6 6 12 OUTPUT LEVEL 12 OUTPUT LEVEL 12 OUTPUT LEVEL 12 OUTPUT LEVEL 12 OUTPUT LEVEL 12 OUTPUT LEVEL 24 1 24 2 24 3 24 4 24 5 24 6 MUTE MUTE MUTE MUTE MUTE MAXIDRIVE3.
13.
14. WARRANTY 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to provide amore effective and efficient after-sales warranty service.
SEIKAKU TECHNICAL GROUP LIMITED NO. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan www.altoproaudio.com Tel: 886-4-22313737 email:info@altoproaudio.com Fax: 886-4-22346757 All rights reserved to ALTO. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. Copyright c 2008 Seikaku Group NF03235-1.
