User`s manual

OFF
ON
INPUT LEVEL
(INPUT LEVEL)
XOVER FREQ
(XOVER FREQ)
LOW GAIN
(LOW GAIN)
HIGH GAIN
(HIGH GAIN)
XOVER FREQ
(XOVER FREQ)
LOW GAIN
(MID GAIN)
CHANNEL 2CHANNEL 1
700
300170
90
00
HIGH GAIN
10
1
MUTERANGEMUTE
80
1K
OFF
INPUT LEVEL
2W- STEREO
(3W- MONO)
10
1
RANGE MUTEMUTE
HIGHLOW
HIGHLOW
6
OFF
6
CLIP
CLIP
0
6
OFF
0
6
OFF
0
6
OFF
0
6
OFF
0
6
OFF
300170
80
1K
700
90
POWER
2-WAY STEREO
3-WAY MONO
ACTIVE CROSSOVER
X23
R
LTO
SPOTLIGHT
3. CONTROL ELEMENTS
1 POWER switch
This illuminated switch will turn your X23 ON and OFF
FRONT PANEL
2 INPUT LEVEL
This knob regulates the level of the input signal fed into your X23.
3 CLIP
These LOW and HIGH Leds will light up when one or both audio bands are
clipping. These leds should light up only occasionally for optimal operation
and avoid distortion.
Turn the INPUT LEVEL control down if they are always on.
4 LOW GAIN
This knob will regulate the level of the low frequency band with a maximum
gain of+6 dB.
5 HIGH GAIN
This knob will regulate the level of the high frequency band with a maximum
gain of+6 dB.
6 MUTE
These switches will mute the respective low or high band. When the low-mute
switch is engaged you will only hear the high frequency band and vice versa.
7 XOVER FREQUENCY
This knob will set the crossover frequency. You can vary continuously such
frequency from 80 to 1kHz with the RANGE switch depressed and from 800
to 10 kHz with the RANGE switch engaged.
1
662
3 4 7 5
2