User`s manual

USER’S MANUAL
Kaleido-ALTO/QUAD | 15
You may also choose to output a color bars test pattern at the MWO-HDM or MWO-SDM output: check
the Color Bars checkbox.
Figure 4.14 Output Configuration panel, SDI Output
The PowerUp menu item opens up the Save Default Layout window; clicking the button saves the
position of each window in hardware as system default, which will be used when powering up. This layout
will appear after 5 seconds when power up is initiated. Current layout is re-applied once the application is
up and running (10 sec. later).
Figure 4.15 PowerUp panel
The Volume item menu invokes the same volume control slider described on page 6.
Serial Ports configuration is achieved through this control panel and enables each communication port.
They may be used to communicate with third-party devices to provide tally information and dynamic text
for UMDs and Text Labels or interface with the Kaleido-RCP or a time code reader such as Miranda’s
Little Red. Details on how to use the data can be found in the K-Edit software’s on-line help manual.
Assign a function to each port as needed. When using a Kaleido-RCP with the unit, select the Kaleido-
RCP option in the menu for Port RS-422 A. When using a Little Red Time Code Reader, select TC in
Little Red for Port RS-232. Note that TSL and Andromeda protocols are mutually exclusive; when one is