Hardware reference guide

Back Panel

8 • Overview Palo Alto Networks

Back Panel

Figure 2 shows the back panel of the M-100 and Table 2 describes the back panel features.

Figure 2. Back Panel

Table 2. Back Panel Features

Item Description

1) Power Port AC power inlet.

2) 2 RJ-45 10/100/1000 Ethernet Port 2 used for log collection and collector

group communication. You can configure ports 1 and 2 to perform one or

both of these functions, but you cannot configure both ports to perform the

same function.

Note: This port functionality is available in version 6.1 and later. Prior to

6.1, this port is not functional.

3) 3 RJ-45 10/100/1000 Ethernet Port 3. (Reserved for future use)

4) USB Ports USB ports for future use.

5) UID Button The Unique Identification feature is a combination LED/button that is used

to assist a technician in determining which device is being worked on when

moving from the front of a rack to the back of a rack. When the button is

pushed (either front or rear), both the front and rear UID LEDs will flash

blue, assisting the technician in identifying the device in a rack. When

either button is pushed again, the flashing LEDs stop flashing.

UID