Hardware reference guide

Interpreting the Port LEDs
18 • Maintaining the Hardware Palo Alto Networks
2. Slide the drive bay into the desired slot about half way, ensuring that the side rails are
aligned.
3. Use the blue button to push the drive all the way into the slot. This will cause the lever to
close part way. Push the lever all the way inward to lock the drive bay into place.
Figure 9. Disk Drive Replacement
Interpreting the Port LEDs
Each Ethernet port on the M-100 has two LEDs. Table 3 describes the LEDs.
Table 3. Port LEDs
LED Description
Left Shows green if there is a network link.
Right Blinks if there is network activity.