Hardware reference guide

Palo Alto Networks Installing the Hardware • 13
Equipment Rack Installation
3. Attach the outer rail to the rack. The 2-post install will use the two inner mounting
brackets to attach to the rack and the 4-post install will use the two outer brackets. Both
install methods are shown in
Figure 5.
Figure 5. Installing the Outer Rail on a 2-post and 4-post Rack
Note: If you are using a non-threaded rack, install the threaded brackets behind
each rack mount point as shown in Figure 5.
2-post
Two threaded
4-post
Install
mounting brackets
for non-threaded racks.
Install
Two threaded
mounting brackets
for non-threaded racks.