Hardware reference guide

GlobalProtect Administrator’s Guide 79
Set Up the GlobalProtect Mobile Security Manager Enable Gateway Access to the Mobile Security Manager
Step 5 Configure the gateways to access the
Mobile Security Manager.
From each firewall hosting a GlobalProtect gateway, do the
following:
1. Select
Network > GlobalProtect > MDM and then click Add to
add the Mobile Security Manager.
2. Enter a
Name for the Mobile Security Manager and specify
which virtual system it belongs to from the
Location field (if
applicable).
3. Enter the
Server IP address or FQDN of the interface on the
Mobile Security Manager where the gateway will connect to
retrieve HIP reports. The value must match the CN (and, if
applicable the SAN) field in the Mobile Security Manager
certificate associated with the interface.
4. (Optional) If you want to use mutual authentication between the
gateway and the Mobile Security Manager, select the
Client
Certificate
the gateway will present when establishing a
connection with the Mobile Security Manager.
5. In the
Trusted Root CA field, click Add and select the root CA
certificate that was used to issue the Mobile Security Manager
certificate for the interface where the gateway will connect to
retrieve HIP reports.
6. Click
OK to save the settings and then Commit the changes.
Enable Gateway Access to Mobile Security Manager (Continued)