Hardware reference guide

66 GlobalProtect Administrator’s Guide
Register, License, and Update the Mobile Security Manager Set Up the GlobalProtect Mobile Security Manager
Install Content and Software Updates
Use the following procedure to download the latest Android Package (APK) malware updates and/or upgrade
the Mobile Security Manager software. By keeping APK updates current, you can prevent managed Android
devices containing malware-infected apps from connecting to your network resources.
Step 2 Activate the license(s).
If the Mobile Security Manager will
manage more than 500 mobile devices, a
GlobalProtect Mobile Security Manager
perpetual license is required.
Note If the management port (MGT) on the
Mobile Security Manager does not have
Internet access, manually download the
license files from the support site and
upload it to the appliance using the
Manually upload license key option.
1. To activate your support subscription (required after 90 days),
select
Setup > Support.
2. Select
Activate feature using authorization code. Enter the
Authorization Code and then click OK.
3. Verify that the subscription was successfully activated.
4. In the
Setup > Licenses tab, select Activate feature using
authorization code
.
5. When prompted, enter the
Authorization Code for the Mobile
Security Manager license and click
OK.
6. Verify that the license was successfully activated and that it
displays support for the appropriate number of devices:
Step 3 (Not required if you completed Step 2)
Retrieve license keys from the license
server.
Use the
Retrieve license keys from the license server option if you
have activated the license keys on the Support portal.
Select
Setup > Support, and select Retrieve license keys from the
license server
.
Get Software and Content Updates
Step 1 Launch the Mobile Security Manager web
interface and go to the dynamic updates
page.
Before updating the software, install the
latest dynamic updates supported in the
release.
1. Using a secure connection (https) from a web browser, log in
using the IP address and password you assigned during initial
configuration (https://<IP address> or
https://<IP address>:4443 if device check in is enabled on the
interface).
2. Select
Setup > Dynamic Updates.
Activate the Licenses (Continued)