Hardware reference guide

40 GlobalProtect Administrator’s Guide
Configure the GlobalProtect Portal Set Up the GlobalProtect Infrastructure
Step 6 Specify which users to deploy this
configuration to. There are two ways to
specify who will get the configuration: by
user/group name and/or the operating
system the agent is running on.
The portal uses the User/User Group
settings you specify to determine which
configuration to deliver to the
GlobalProtect agents that connect.
Therefore, if you have multiple
configurations, you must make sure to
order them properly. As soon as the
portal finds a match, it will deliver the
configuration. Therefore, more specific
configurations must precede more
general ones. See Step 11 for instructions
on ordering the list of client
configurations.
Before you can restrict the
configuration to specific groups,
you must map users to groups as
described in Enable Group
Mapping.
Select the
User/User Group tab and then specify the user/user
groups and/or operating systems to which this configuration should
apply:
• To restrict this configuration to a specific user or group, click
Add
in the User/User Group section of the window and then select the
user or group you want to receive this configuration from the
drop-down. Repeat this step for each user/group you want to add.
• To restrict the configuration to users who have not yet logged in
to their systems, select
pre-logon from the User/User Group
drop-down.
• To deliver this configuration to agents or apps running on specific
operating systems, click
Add in the OS section of the window and
then select the OS (
Android, iOS, Mac, or Windows) to which this
configuration applies.
Step 7 Customize the behavior of the
GlobalProtect agent for users with this
configuration.
Select the
Agent tab and then modify the agent settings as desired.
For more details about each option, see Customize the
GlobalProtect Agent.
Create a GlobalProtect Client Configuration (Continued)