Hardware reference guide

162 GlobalProtect Administrator’s Guide
GlobalProtect Multiple Gateway Configuration GlobalProtect Quick Configs
Step 7 Configure the GlobalProtect Portal.Select Network > GlobalProtect > Portals and add the following
configuration:
1. Set Up Access to the Portal:
Interface—ethernet1/2
IP Address—198.51.100.42
Server Certificate—GP1-server-cert.pem issued by Go Daddy
2. Create a GlobalProtect Client Configuration:
The number of client configurations you create depends on
your specific access requirements, including whether you require
user/group-based policy and/or HIP-enabled policy
enforcement.
Step 8 Deploy the GlobalProtect Agent
Software.
Select
Device > GlobalProtect Client.
In this example, use the procedure to Host Agent Updates on the
Portal.
Step 9 Save the GlobalProtect configuration. Click
Commit on the firewall hosting the portal and the gateway(s).
Quick Config: GlobalProtect Multiple Gateway Configuration (Continued)