Hardware reference guide

146 GlobalProtect Administrator’s Guide
Remote Access VPN (Authentication Profile) GlobalProtect Quick Configs
Step 5 Create an authentication profile. Attach the server profile to an authentication profile: Device >
Authentication Profile
.
Step 6 Configure a GlobalProtect Gateway.Select
Network > GlobalProtect > Portals and add the following
configuration:
Interface—ethernet1/2
IP Address—199.21.7.42
Server Certificate—GP-server-cert.pem issued by Go Daddy
Authentication Profile—Corp-LDAP
Tunnel Interface—tunnel.2
IP Pool—10.31.32.3 - 10.31.32.118
Step 7 Configure the GlobalProtect Portal.Select
Network > GlobalProtect > Portals and add the following
configuration:
1. Set Up Access to the GlobalProtect Portal. This example uses
the following settings:
Interface—ethernet1/2
IP Address—199.21.7.42
Server Certificate—GP-server-cert.pem issued by Go Daddy
Authentication Profile—Corp-LDAP
2. Create a GlobalProtect Client Configuration using the following
settings:
Connect Method—on-demand
External Gateway Address—gp.acme.com
Step 8 Deploy the GlobalProtect Agent
Software.
Select
Device > GlobalProtect Client.
In this example, use the procedure to Host Agent Updates on the
Portal.
Step 9 (Optional) Enable use of the
GlobalProtect mobile app.
Purchase and install a GlobalProtect Gateway subscription
(
Device > Licenses) to enable use of the app.
Step 10 Save the GlobalProtect configuration. Click
Commit.
Quick Config: VPN Remote Access (Continued)