Hardware reference guide

GlobalProtect Administrator’s Guide 135
Use Host Information in Policy Enforcement Configure HIP-Based Policy Enforcement
Step 3 (Optional) Exclude categories from
collection.
1. On the firewall that is hosting your GlobalProtect portal, select
Network > GlobalProtect > Portals.
2. Select your portal configuration to open the GlobalProtect
Portal dialog.
3. On the
Client Configuration tab, select the Client
Configuration from which to exclude categories, or click
Add to
create a new client configuration.
4. Select
Data Collection > Exclude Categories and then click
Add. The Edit Exclude Category dialog displays.
5. Select the
Category you want to exclude from the drop-down
list.
6. (Optional) If you want to exclude specific vendors and/or
products from collection within the selected category rather
than excluding the entire category, click
Add. You can then
select the
Vendor to exclude from the drop-down on the Edit
Vendor dialog and, optionally, click
Add to exclude specific
products from that vendor. When you are done defining that
vendor, click
OK. You can add multiple vendors and products to
the exclude list.
7. Repeat Step 5 and Step 6 for each category you want to exclude.
8. If this is a new client configuration, complete the rest of the
configuration as desired. For more information on defining
client configurations, see Define the GlobalProtect Client
Configurations.
9. Click
OK to save the client configuration.
10.
Commit your changes.
Enable HIP Checking (Continued)