Service manual

Q U I CK CH I L LE R • M N -3 6 5 80 ( RE V . 0 ) • I N ST A L LA T I ON / O PE R A TI O N /S ER V I CE M A N UA L • 24.
Settings
- Touch
to choose Farenheit or Celcius for Quickchiller screen readings.
Touch
to begin defrost cycle. Screen will display defrost duration and drip time. The defrost
cycle will complete when the temperature of the coil or coils reach set-point values or after a user set period has been
reached, whichever occurs rst.
Touch
. Screen will indicate the lenght of time necessary to accrue befor the Fan Timer triggers
an automatic defrost cycle. The length of time can be adjusted by touching
or
to adjust defrost cycle time.
 - Touch
. The offset and the temperature will display for probe 1 (top), 2 (middle), and 3
(bottom). Use
or
to set desired probe temperature(s).
Touch
and use
or
to set desired date (MM/DD/YY) and time (HH:MM).
Touch
and use
or
to adjust screen brightness.
Press
or
to access additional settings screens.
SUB TITLE
TITLE
OPERATING INSTRUCTIONS
OPERATION
Settings
Farenheit/Celcius
Manual Defrost
Defrost Frequency
Probe Calibration
Date/Time
Screen Brightness
Default Hold Temperature
Defrost Duration
Drip Time
Factory Pressets
Screen Calibration
Probe Count
Alarm
Demo Mode