Operating instructions

2.7 SHUT-DOWN PROCEDURE
PG. 10 #8401 QC-100 INSTALLATION & MAINTENANCE MANUAL
The Quickchiller can be shut-down at the end of
the production day whenever any menu screen
which includes STOP=D is displayed.
Before starting unit shut-down, make certain all
product has been removed from the unit. Press
"D" on the keyboard to begin shut-down.
The unit will display a Stop Prompt screen as a
safeguard against accidental shut-down.
Press "C" on the keyboard to continue shut-
down. The Main Menu Screen will appear in
the display.
MAIN MENU SCREEN
The Quickchiller will be ready for start-up as
required and will be fully operational after
allowing 40 minutes to pre-chill before resuming
operations with product.
For prolonged periods of shut-down, thoroughly
clean and sanitize the interior and exterior of the
unit with a mild detergent diluted in warm
water. Maintain the Quickchiller circuit breaker
and branch circuit breaker (Main Panel) in their
ON positions to preserve control data memory.
If power is terminated for more than fourteen
(14) days, and control data memory is lost, refer
to Control Set-Up and Operation, Section 2.0.
2.0 — Controls, Operation and Start-Up
NOTE: THE CONDENSING UNIT(S) WILL
SHUT OFF IMMEDIATELY, BYPASSING
THE LOW PRESSURE SWITCH.
NO PUMP-DOWN WILL OCCUR.
QUICK CHILL . . . . . . . . . . A
HOLD FOOD . . . . . . . . . . . B
DEFROST UNIT . . . . . . . . . C
PRINT REPORT . . . . . . . . . D
UPPER: 40F (DONE)
MID: 38F (DONE)
LOWER: 36F (DONE)
HOLD: 38F STOP=D
ARE YOU SURE?
YES . . . . . . . . . . . . . . . . . . . .C
NO . . . . . . . . . . . . . . . . . . . .D