Operating instructions

Ga s Fr yer Op er a ti on & Ca re M an ua l • 29

B A S I C C O N T R O L O P E R A T I O N

C O N T R O L P R O G R A M M I N G O V E R V I E W

NOTE:

Because each fryer station is controlled separately, the following procedures must be followed

for every component fryer in multiple-station units.

Control Programming allows you to:

• Set the left and right timers

• Choose the set-point temperature

• Choose the correct melt cycle for our frying compound

• Lock the Control Programming

• Select °F or °C for the temperature display

Press the “PROGRAM” button to enter Control Programming.

This section is provided for the assistance of qualified

personnel only and is not intended for use by

untrained or unauthorized personnel.

Press the L E F T B A S K E T or R I G H T B A S K E T

button to scroll through the choices for each function.

Pressing the P R O G R A M button confirms the change

and moves on to the next function.

+ HOLD

Pressing and holding the P R O G R A M button for one

second exits Control Programming.