User Manual

Gas Fryer Operation & Care Manual • 35
DELUXE CONTROL OPERATION
PROGRAMMING THE CONTROL
“Product”
“ShakTime”
The “ShakTime” sub-menu provides the operator with a programmed time period
during which the baskets will automatically lift to half the normal raised position so
that the operator can shake each basket.Whenprogrammedintoaproductprocedure,
an alarm will sound to alert the operator at the start of the “ShakTime” cycle and
will continue until the activated product key is pressed. The amount of “ShakTime”
canonlybeprogrammeduptothemaximumamountoffryingtimeallottedtothe
programmed product.
There is no “ShakTime” programmed into any of the products shown on the product
chart. The control provides shake time adjustment from “OFF” up to a period of
60minutes.Whenreceivedfromthefactory,shake-timewillindicate“OFF” in the
display for all programmed preset items.
Press the right4arrow key to enter the “ShakTime” sub-menu. Display stops flashing.
Press the Up or Downarrowkeystochangethesetting.Whenthedesired
amount of “ShakTime” appears, press the right4 arrow key to confirm the setting.
If no shake time is required, press the Down arrow key and scroll until “OFF”
appearsinthedisplay.Whenthecorrectsettingappears,presstheright4 arrow
key to confirm. Display flashes. Press the down  arrow key to advance the control
tothenextsub-menusetting.
OFF
ShakTime
Product
To exit the control programming mode at any time, press and hold the LEFT arrow key.